INDUSTRIAL
3850 Industrial Avenue
•
Hemet, CA 92545
Title Drawing
Number
INSTRUCTION GUIDE FOR DTT-12-02
0425-078-0000
Revision Letter:
A
Engineering Order Number:
P21276
Page
1
of
4
I N F O R M A T I O N
Revisions
Sym Description Date
Approved
NC
New Release per E.O. P21080
10/12/11
S. Beard
A
Revised per E.O. P21276
2/3/12
R.D.R.
BEFORE using this hand tool, please read these instructions completely!
Basic Safety Instructions
This crimp tool must be used in full compliance with all applicable safety rules, regulations and
practices. It must be properly maintained, undamaged and in good working order. Unauthorized
modification is prohibited and shall void all warranties. Always wear safety glasses with side
shields and other appropriate personal protective equipment.
CAUTION:
Misuse May Cause Personal Injury. Keep Out Of Reach Of Children!
Never Insert Fingers Between Any Moving Parts Of The Tool!
Applications
Hand tool DTT-12-02 has been developed for field crimping of Deutsch stamped and formed
contact numbers 1060-12-01** Pin and 1062-12-01** Socket per
Table 1
:
** Note: Plating of the contacts is characterized in the final 2 digits of the part number.
** Examples: 44 = Gold Plate, 66 = Tin/Nickel
Description
DTT-12-02 has a locator with a combination contact lock pawl with integral wire stop, fixed and
movable crimp dies, emergency ratchet release, and crimp force adjustment wheel.
The ratchet has six steps and opens automatically after the crimp is completed. To prevent
damage to the tool, operator, or contact, an emergency release is included.
