Dell Studio XPS 1640 Service Manual Download

Page: 1 / 48

Dell™ Studio XPS™ 1640 Service Manual

Notes, Notices, and Cautions

Information in this document is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text:

Dell

XPS

, and the

DELL

logo are trademarks of Dell Inc.;

Bluetooth

is a registered trademark owned by Bluetooth SIG, Inc. and is used by Dell under

license.

Microsoft

Windows

Windows Vista

a n d

Windows Vista start button logo

are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or

other countries.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.

Model PP35L

December 2008 Rev. A00

Before You Begin

Base Cover

Hard Drive

Rear Caps

Processor Heat Sink

Processor

Thermal Fan

Memory

Coin-Cell Battery

Wireless Mini-Card

Palm Rest

Keyboard

Speakers

Optical Drive

Display Assembly

IEEE 1394 Module

Subwoofer

Audio Board

System Board

TV Tuner Card (Optional)

eSATA Connector

AC Adapter Connector

Battery Latch Assembly

Flashing the BIOS

NOTE:

A NOTE indicates important information that helps you make better use of your computer.

NOTICE:

A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

CAUTION:

A CAUTION indicates a potential for property damage, personal injury, or death.

Summary of Contents for Studio XPS 1640

















































Search results

Summary of Contents for Studio XPS 1640

Reviews:

Related manuals for Studio XPS 1640

Brands by name

Popular brands

Dell Studio XPS 1640, Service Manual

Search results

Summary of Contents for Studio XPS 1640

Reviews:

Related manuals for Studio XPS 1640

Brands by name

Popular brands