background image

Dell™ SP2008WFP Flat Panel Monitor 

 

Notes, Notices, and Cautions 

 

 

 

 

 

 

 

 

Information in this document is subject to change without notice. 

© 2007 Dell Inc. All rights reserved.

 

Reproduction in any manner whatsoever without the written permission of Dell Inc.

 

is strictly forbidden. 

Trademarks used in this text: 

Dell

, the 

DELL

 logo, 

Inspiron

Dell Precision

Dimension

OptiPlex

Latitude, PowerEdge, PowerVault, PowerApp, and Dell OpenManage 

are trademarks of Dell 

Inc;  

Microsoft, Windows,

 and

 Windows NT 

are registered trademarks of Microsoft Corporation; 

Adobe

 is a trademark of Adobe Systems Incorporated, which may be registered in 

certain jurisdictions.

  ENERGY STAR

 is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product 

meets the ENERGY STAR guidelines for energy efficiency. 

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any 
proprietary interest in trademarks and trade names other than its own. 

Model SP2008WFP  

June 2007 Rev. A00 

 

 

 

 

About Your Monitor 

Front View

 

Back View

 

Side View

 

Bottom View

 

Monitor Specifications

 

Cleaning Your Monitor

 

Using Your Monitor Stand 

Attaching the Stand

 

Organizing Your Cables

 

Using the Tilt

 

Removing the Stand

 

Setting Up Your Monitor 

Connecting Your Monitor

 

Installing the Webcam Application

 

Using the Front Panel

 

Using the OSD

 

Setting the Optimal Resolution 

 

Using the Dell Soundbar (Optional)

 

 

 

Solving Problems 

Troubleshooting Your Monitor

 

General Problems

 

Product Specific Problems

 

USB Problems

 

Troubleshooting Your Soundbar

 

 

 

Appendix 

Safety Instruction

 

FCC Notice (U.S. Only) and Other Regulatory Information

 

Contacting Dell

 

 

 

NOTE: 

A NOTE indicates important information that helps you make better use of your computer. 

NOTICE:

 A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. 

  CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.

Summary of Contents for SP2008WFP - 20" LCD Monitor
































Reviews: