Wedge your fingers between the rear cover and the
middle bezel on the corners of the top side of the
monitor to release the rear cover, then use one hand
to press the middle bezel, the other hand to pull up
carefully the rear cover in order of arrow preference
for unlocking mechanisms of rear cover.
.
Use a Philips-head screwdriver to remove 6pcs
screws for unlocking mechanisms.
(No.1~4 screw size=M4x11; Torque=7 8kgfxcm;
No.5~6 screw size=M4x8; Torque=7 8kgfxcm)
~
~
S5
Take out all of the
QSG,
accessories including
HDMI
cable, power cable, CD&user’s manual, stand base,
stand riser and EEI label from the carton. (Note: It
depends on whether users returning the accessories)
S2
Open the Pizza carton with a proper tool.
1
. Disassembly Procedures:
S6
S4
S1
Take out of the
from the carton, then take out the monitor from
the EPE bag and put it on a protective cushion.
molded pulp with base, riser and
cover
S3
1
DELL S2721H
1
4
2
2
riser
base
2
3
4
1
5
6
Tear off 2pcs acetate tapes and then disconnect the
speaker cable away from the connector. Use a
Philips-head screwdriver to remove 6pcs screws for
unlocking the speakers with middle bezel.
(No.1~6 screw size=M3x8, Torque=5
~
6kgfxcm)
QSG
user’s manual
HDMI cable
power cable
VESA cover
