background image

Dell™ P1911 Flat Panel Monitor User's Guide

 

Notes, Notices, and Cautions 

 

 

 

 

 

 

 

Information in this document is subject to change without notice. 

© 2010 Dell Inc. All rights reserved.

 

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.

 

is strictly forbidden. 

Trademarks used in this text: 

Dell

 and the 

DELL

 logo are trademarks of Dell Inc;  

Microsoft 

a n d

 Windows 

are either trademarks or registered trademarks of Microsoft Corporation in 

the United States and/or other countries, 

Intel

 is a registered trademark of Intel Corporation in the U.S. and other countries; and ATI is a trademark of Advanced Micro Devices, 

Inc. ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product meets the 
ENERGY STAR guidelines for energy efficiency. 

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any 
proprietary interest in trademarks and trade names other than its own. 

Model P1911b, P1911t.  
 
AUG 2010 Rev. A00  

About Your Monitor

  

Setting Up the Monitor

 

Operating the Monitor

 

Troubleshooting 

 

Appendix

 

 

NOTE: 

A NOTE indicates important information that helps you make better use of your monitor. 

CAUTION:

 

A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

 

WARNING: 

A WARNING indicates a potential for property damage, personal injury or death.

Summary of Contents for P1911







































Reviews: