background image

Visit our website at: http://www.harborfreight.com

Email our technical support at: [email protected]

DOUBLE LOCKING PIN

JACK STAND

Owner’s Manual & Safety Instructions

Save This Manual

Keep this manual for the safety warnings and precautions, assembly, 

operating, inspection, maintenance and cleaning procedures.  Write the product’s serial number in the 

back of the manual (or month and year of purchase if product has no number). Keep this manual and the 

receipt in a safe and dry place for future reference. 

23k

When unpacking, make sure that the product is intact 

and undamaged.  If any parts are missing or broken, 

please call 1-888-866-5797 as soon as possible.

Copyright

©

 2023 by Harbor Freight Tools

®

.  All rights reserved.  

No portion of this manual or any artwork contained herein may be reproduced in 

any shape or form without the express written consent of Harbor Freight Tools.  

Diagrams within this manual may not be drawn proportionally.  Due to continuing 

improvements, actual product may differ slightly from the product described herein.  

Tools required for assembly and service may not be included.

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

DJS6TBK Shown

DJS3TBK DJS3TOR 

DJS3TY DJS3TGR DJS3TBL 

DJS3TGRY DJS3TMP 3-Ton

DJS6TBK DJS6TOR 

DJS6TY DJS6TGR DJS6TBL 

DJS6TGRY 6-Ton

DJS12TBK 12-Ton

Summary of Contents for DJS3TMP









Reviews: