LOGO-ICON
LOGO-TYPE
(MAIN LOGO)
Colour 1:
Dash Blue
RGB: 0,240,244
HEX: #00F0F4
CMYK: 30,4,4,0
PMS: 311c
Colour 2:
Neutral Black
RGB: 51,51,51
HEX: 333333
CMYK: 15,15,15,90
PMS: Neutral Black C
Daxys Head Light
Model:
User Manual
Daxys Head Light
5. SPECIFICATION
V9M-1200
LED
1200 lm
21700*1/4400mAh
5V / 2.0A
≈3.5h
＞
118°
＞
200m
IPX6
107.7*27.6*38.4mm
≈159g
Model
Light Source
Max Brightness
Battery
Input
Charging Time
Floodlight Angle
Beam Distance
Waterproof
Dimension
Weight
Indicator Colour
Blue
Yellow
Red Flash
Remaining Battery
100-61%
60-21%
20-1%
Charging Time: ≈3.5 hours
Running Time
≈1.5 hrs
≈3.0 hrs
≈7 hrs
≈14 hrs
≈22 hrs
≈28 hrs
Working Mode
Ultra High Steady 1200lm
High Steady 600lm
Medium Steady 300lm
Low Steady 100lm
Breathe 100-50lm
Daytime Flash
Bracket
USB-C cable
Mount the bracket to the handlebar as below picture, and
tighten the nut.
Headlight
1. PACKAGE LIST
2. INSTALLATION
Nut
Strap
Slide the bottom of the light into the bracket. When you hear
a “click” sound, the installation is complete. Please adjust
the light angle.
单色双面印刷
折叠尺寸：55*90mm(展开尺寸：330*90mm)
印刷红线框去掉，黑色虚线保留
If the light gets hot and the inner components temperature
of 65°C is detected, it switches to high brightness mode.
When temperature is cooled off to 55°C, it switches back to
original brightness mode.
The light turns off automatically when internal component
temperature of 75° is detected.
Smart Working:
The smart mode indicator light on means the light and motion
sensor working normally.
Light Sensor Working: W
hen there is sufficient light (≥10
0 lux) in
the cycling environment, the light will flash as daytime warning
light. When the cycling environment is dark (
＜
100 lux), the light
will enter into 500 lm steady mode.
With smart working mode, the light will be off after 120s if
without detecting any motion, and go back to smart working
mode when detecting the motion.
Temperature Control Components Protection:
The light will automatically power off after 5s if detecting the
NTC malfunction intelligently.
Circuit Protection:
Overcharge protection/overdischarge protection / overcurrent
protection / short circuit protection / high temperature protection /
false touch protection
Light Angle Adjustment
Loosen the nut slightly to move the bracket. Adjust the
light angle so it does not hit directly into the oncoming
traffic and then tighten the nut firmly to fix the bracket.
Adjust the light with the 360 degree adjustable bracket
to your desired angle.
4. OPERATION AND FUNCTION
Press
3. CHARGING
Open the rubber plug at the bottom of the headlight and insert
the USB-C cable to connect to the charging device for charging.
Charging Status: Red indicator light flashes when charging,
and blue indicator light is on after it is fully charged.
Note: The USB-C cable must be plugged in place to charge
normally.
128g双铜
V1.1
加雪龙
窦婵玉
王婷/宣章珊
2022.8.10
材质：
Warranty Card
1. Purchase date is defined in accordance with the invoice or
receipt made by retailer.
2. Under the following circumstances, where returns are not
covered under warranty we offer a paid repair service.
* AII damages caused by subjective factors, such as using under
abnormal conditions or against the user manual.
* User's independent repairing and modifying or other
unauthorised maintenance.
* Damages caused by improper shipping.
3. Daxys is irresponsible for any damages caused by the
following improper uses.
* Hidden safety factors or incidents caused by user's improper
operation or other accidents.
* Hidden safety factors or incidents caused by irresistible
factors.
* Damages or accidents or injuries caused by user's
independent operation against the manual or, using other
materials on the product which causes malfunction.
4.
The right of modification and interpretation on the above
terms is held.
*Please charge the product at the environmental temperature
from 5 to 40 degrees Celsius;
*Please check whether the charging line is good before charging;
*When charging, please use the 5V USB power adapter;
* Please pull the charging plug out after charging;
*Please do not charge, discharge or store in the hot environment,
otherwise it will accelerate the aging of the battery; Please store
the fully charged headlights in a cool and dry place;
*After the correct charge, if the battery usage time is shorter and
shorter, it means that the rechargeable battery has reached the
effective service life. Please replace the battery at the local
maintenance point and properly dispose of the waste
rechargeable battery according to local regulations;
* This product should be charged once every 3 months without
use, so as not to cause damage to the battery and resulting in
unusable condition;
*Please do not stare at the light when it is just turned on to avoid
damaging the eyesight.
*After the light is used for long time, please do not touch the light
to avoid getting scald.
* Children are forbidden to use without adults’ supervision.
V9M-1200
IPX6
1. Power On/Off:
Long press the button for 0.75s.
2. Modes Change: Single click the button to change working
modes (Ultra
High 1200 lm - Daytime Flash - Breathe - Low
100 lm - Medium 300 lm -
High 600 lm - Cycle). The button
indicator will be light for 5s when single press in Power Off
status.
3. Long Press 2s:
Long press 2s to enter into smart working
mode in N-Charge status, and short press to go back to the
memorized previous working mode.
4. Double Click: Double click the button to enter into the ultra
high brightness mode 1200 lm. Single click the button to return
to the memorized previous working mode.
5. The light will be off after long press for 10s continuously in
any working status.
★
Remark: When entering into the smart working mode, the
light will flash three times, and the smart mode indicator will
become green color. Single click the button to switch back to
memorised mode and the green indicator is off.
USB-C charging cable
5
