The instructions provide information about installing the VLT
®
Memory Module MCM 102 in VLT
®
Midi Drive FC 280.
The VLT
®
Memory Module MCM 102 is an option for FC 280
frequency converters. A memory module is a component that
stores motor data, firmware, and parameter settings of a
frequency converter. If a frequency converter malfunctions, the
motor data, firmware, and parameter settings on this
frequency converter can be copied to new frequency
converters of the same power size. Copying the settings saves
the time for setting up new frequency converters for the same
applications.
The data and parameter settings on a memory module are
encoded files that are protected from direct viewing.
To access files in a memory module, or transfer files to a
memory module, a memory module programmer is required. It
is not included in this package and must be ordered
separately (ordering number: 134B0792).
1
Memory module
2
Status indicator light
3
Socket for memory module
4
Memory module programmer
5
USB Type-B receptacle
Illustration 1.1 Memory Module and Memory Module Programmer
The memory module can be inserted and removed during
operation of the frequency converter, but it is only active after
a power cycle. The personnel mounting or dismounting the
memory module must be familiar with the safety instructions
and measures described in the
VLT
®
Midi Drive FC 280
Operating Instructions
.
Items Supplied
Description
Ordering number
VLT
®
Memory Module MCM 102
132B0359
Table 1.1 Ordering Numbers
Installation
1.
Remove the plastic front cover of the frequency
converter with a screwdriver.
Illustration 1.2 Removing the Front Cover of the Frequency
Converter
Installation Instructions
VLT® Memory Module MCM 102
VLT® Midi Drive FC 280
Danfoss A/S © 02/2016 All rights reserved.
MI07H102
