Dakota Micro, Inc.
8659 148½ Ave. SE
Cayuga, ND 58013
www.dakotamicro.com
Author: CNR
Title: UserMan DMOV-7MQ-C2
Rev: 02/25/19
Quad View Monitoring System
Users Manual
Part Number:
DMOV-7MQ-C2
www.dakotamicro.com
TROUBLESHOOTING
Problem
Possible Causes
No picture, no sound
Improper connection with 12v power adapter.
Use of unauthorized power supply
Monitor is in OFF position
No picture
Check whether AV cable is securely plugged in
No sound
Check whether audio connector is secure
Check whether the sound volume is turned off or down
Dark picture
Ensure that bright and contrast settings are properly
adjusted
Ensure monitor is warm enough
No color
Ensure color settings are properly adjusted in menu
Upside down or lateral
inverted picture
Check horizontal/vertical adjustment on remote
Event Triggers not
activating (i.e. No
picture during triggered
event)
Event trigger is not securely connected
Remote Controller Fault
Battery may be dead or improperly installed:
replacement battery Model:CR2025,3V
Remote controller is not pointed in the direction of the
receiving sensor on monitor
Too far away or improper angle: The maximum effective
distance between the remote controller and the receiving
sensor is 15 feet and the angle is 30 degrees.
Obstacle: Move any obstacles out of the path
