2. Use your fingernail or a flathead screwdriver to pry open the magnetic contact’s cover.
3. Mount the magnetic contact with a drill and two screws (included), then snap the cover back on.
4. Mount the transmitter bracket with a drill and two screws (included). Make sure that the arrow on the bracket is
facing up.
5. If you’re mounting your transmitter outdoors, push the silicone plugs into the push button’s screw holes to
waterproof the casing.
6. Slide the transmitter down onto the bracket.
SPECIFICATIONS
•
Power source: CR2 battery
•
Transmitter range: up to 1.6 km*
•
Frequency: 433 MHz
•
Dimensions: (W × H × D) 50 × 95 × 22mm)
*Actual range will vary depending on local terrain and obstructions.
TECHNICAL SUPPORT:
If you encounter any difficulty in the operation of this product after reading the manual, please contact us.
We will be happy to answer your questions and help you in any way we can.
WARRANTY:
Dakota Alert warrants this product to be free of defects in material and workmanship for a period of one year from
the date of purchase. This warranty does not cover damage resulting from accident, abuse, act of God or improper
operation. If this product does become defective, simply return it to Target Technology Ltd. Please include a note
describing the troubles along with your name and return address as well as the original sales receipt. If the product is
covered under warranty it will be repaired or replaced at no charge. If it is not covered by warranty, you will be notified
of any charges before work is done.
Freephone New Zealand: 0508 242 333
Phone (64) 6 751 2969
Fax (64) 751 2717
PO Box 730, New Plymouth 4342
NEW ZEALAND
Freephone Australia: 1300 588 195
Fax (64) 751 2717
AUSTRALIA
www.bealert.co.nz
www.bealert.com.au
NEW ZEALAND
AUSTRALIA
This UT-4000 Dakota Alert Universal Transmitter sends a signal to your DCR-4000 receiver
when its button is pressed or it detects a door/window opening. Connect multiple Dakota Alert
transmitters to your receiver to create a complete security system.
Universal
Transmitter
UT-4000-ANZ
USER GUIDE
Transmitter
Bracket
Magnetic
cover
