background image

www.bealert.co.nz

www.bealert.com.au

NEW ZEALAND

AUSTRALIA

WARNING:

This device complies with Part 15 of the FCC rules, operation of this device is subject to the following conditions: 
1. This device may not cause harmful interference. 
2. This device must accept any interference, including interference that may cause undesired operation.

UT-2500

Universal Transmitter

Owners Manual

Summary of Contents for UT-2500

Page 1: ... with Part 15 of the FCC rules operation of this device is subject to the following conditions 1 This device may not cause harmful interference 2 This device must accept any interference including interference that may cause undesired operation UT 2500 Universal Transmitter Owners Manual ...

Page 2: ...red zone tune and relay output See Coding the transmitter for info on setting the dip switches INSTALLING THE BATTERY 1 Use only a CR 2 3 Volt Lithium battery 2 Be sure to observe proper polarity when installing the battery LED INDICATOR LIGHT IN BUTTON 1 The default setting is for the LED indicator to light up for two seconds when the UT 2500 is activated 2 To deactivate the LED press and hold th...

Page 3: ...he magnet on the door snap the cover on the magnet case 4 The magnetic contact can be used on either side of the push button Figure 4 USING MULTIPLE DETECTORS If multiple normally closed N C contacts are to be used they should be run in series to the N C contacts If multiple normally open N O contacts are used they should be run in parallel to the N O contacts Note Both N O and N C contacts can be...

Page 4: ...y TECHNICAL SUPPORT If you encounter any difficulty in the operation of this product after reading the manual please contact us We will be happy to answer your questions and help you in any way we can WARRANTY Dakota Alert warrants this product to be free of defects in material and workmanship for a period of one year from the date of purchase This warranty does not cover damage resulting from acc...

Reviews: