UNPACKING
Your system includes the following:
BN441E42
Four-channel Network Recording Kit
❶
Cameras
• 4 x Network Dome Cameras
• 4 x Hardware Packs, with:
Moun ng Template,
Expansion Bolts (3),
Self-tapping Screws (3), Hex Wrench,
Startup Guide, and So ware CD
CONNECTIONS
Camera Connec ons
❷
CONNECTIONS
NVR Connec ons
1
On/Off Bu on
6
VGA OUT
2
PoE, RJ45 (x4)
7
Alarm I/O
3
Network Switch, RJ45
8
12 VDC Power IN
4
USB 2.0
9
HDMI OUT
5
Audio I/O
10
Ground
❽
❾
❶
❷ ❸
❹ ❺ ❻ ❼
❿
❸
DIMENSIONS
Camera and NVR
❹
INSTALLATION
Mount and Make Connec ons
❺
INSTALLATION
Waterproof the Network Connector
• Place the wide side of the rubber ring onto the end of the
network cable extending out from the camera.
• Thread the cable through the Fixing Rubber Ring and the
Waterproof Locking Cover.
• A ach the male Ethernet connector to the network cable
coming from the camera.
• Connect the other end of the waterproof connector to the
network port and rotate it clockwise to lock the network
port and waterproof connector fi rmly.
• Slide the Waterproof Locking Cover over the main body of
waterproof connector and rotate it clockwise to seal the
connec on
❻
1
Video Output
Ethernet, RJ-45
2
Power Input
12 VDC or PoE (IEEE 803af)
375.0 mm
(14.80 in.)
281.50 mm
56.0 mm
(2.20 in.)
(11.10 in.)
Network Video Recorder
• 1 x 4-channel NVR, with:
Pre-installed 2 TB HDD,
12 VDC Power Supply,
Ethernet Cable, Mouse,
Hard Drive SATA Cable, HD Hardware,
Startup Guide, and So ware CD
• Ensure the wall or ceiling can support 3x the weight of the
camera.
• If you are connec ng the IP cameras to the PoE ports of the
NVR, DO NOT connect a 12VDC power supply to the cam-
era. Power will be supplied to the camera via PoE. Proceed
directly to the next step.
