DRPB48 Operation Manual
Pneumatic Blind Rivet Setting Tool - DRPB48
READ THIS MANUAL CAREFULLY BEFORE USING THE TOOL !
It is
IMPORTANT
to follow the safety instructions for adequate protection
against injuries.
- This tool should be used
ONLY
to set blind rivets within the
TOOL’S CAPACITY
. It
MUST
NOT
be used for other purposes, such as hammer, etc.
- This tool should be always operated with compressed air supply within the air pressure
range 0.5Mpa ~ 0.7Mpa.
- Always
DISCONNECT
the air supply from the tool before changing the tool parts, such as
jaws, etc.
-
DO NOT
use the tool in the environment described as below:
fuel and combustion air.
temperature rapidly rising.
humidity, rain, water, storm and thunder, lightning.
- When the tool is suspended by the operation hook during use, be sure the tool will not fall.
- When using the tool, always carry protective goggles, protective gloves, safety helmet, and
other necessary protections. It is highly recommended for safety reasons.
- Only use genuine spare parts for maintenance and repairs.
- All repair work must be carried out by skilled personnel, when in doubt, always return the
tool to the distributor.
TOOL CAPACITY
Blind rivets 3.0/3.2mm ~ 4.0mm ~ 4.8/5.0mm standard – 2.4mm optional.
TOOL SPECIFICATIONS
Air supply pressure:
0.5Mpa ~ 0.7Mpa
Output traction power:
8,400N ~ 11,760 N
Stroke:
16mm
Net weight:
1.30kgs
Summary of Contents for DRPB48
Page 8: ...DRPB48 Operation Manual ...
