Part Identification
Installation
1. Remove the existing door lock and handle assembly as shown
below.
NOTE:
Keep the handle cam on hand to use in the following step
to install the combination lock.
No.
1
2
3
4
5
6
2. Unscrew the cam washer and screw plate from the combination
lock.
1
2
3
4
5
6
Part
Combination Lock Dial
Wing Knob
Locked/Unlocked Position Arrow
Cam Washer
Screw Plate
Keys
Reversing the Handle Direction
The direction in which the handle lifts to open can be reversed by
rotating the cam washer 90 degrees counterclockwise as shown
below. This is especially useful if the door orientation has been
reversed.
90°
3. Slide the combination lock through the door opening, install the
handle cam, and fasten the parts as shown below.
Front
Back
Copyright © 2016 CyberPower Systems, Inc. All rights reserved.
USER’S MANUAL
Combination Door Lock
for Rack Enclosures
Combination Door Lock
for Rack Enclosures
CRA40001
SAVE THESE INSTRUCTIONS
Please read this manual and follow the instructions for installation and use.
K01-0000551-00
