![background image](http://html1.mh-extra.com/html/cusack-music/pedal-cracker/pedal-cracker_manual_2700374001.webp)
www.cusackmusic.com
All
Cusack Music
products are made in Holland, MI, USA,
and carry a lifetime repair warranty.
9V - Power supply input. Uses
industry standard 9V power
supply. Current draw is about
70mA
Wet - Adjusts the level of the
signal coming from the effects
loop.
Dry - Adjusts the level of the
uneffected signal.
Gain - Adjusts the gain of the
mic input from about -4 dB to
+20 dB.
Trails/Presend - Determines
how the Send and Return of the
loop are switched. See back
page for more detail.
Momentary On/Off - inverts the
status of the loop while held
down. See back page.
The Pedal Cracker is a mic preamp with effects loop, allowing the use of standard effects pedals with a
microphone. Separate wet and dry controls, momentary functions, and on-board phantom power make the Pedal
Cracker a robust, yet practical solution for anyone looking to incorporate effects with their voice, horns, or drums.
4585 60th St, Holland, MI 49423
(616)546-8888
Main output (XLR)- this goes to
a mixing console, powered
speaker, etc. Slide switch for
ground lift.
Mic input (XLR)- plug mic in
here. Slide switch for phantom
power.
FX loop return (1/4”), FX loop send (1/4”)
Bypass - latches the effects loop
on or off.