background image

Obtaining Other Language Versions:

 To obtain information in another language about the

use of this product, please contact your local Crown Distributor. If you need assistance locating
your local distributor, please contact Crown at 574-294-8000.

This manual does not include all of the details of design, production, or variations of the equip-
ment. Nor does it cover every possible situation which may arise during installation, operation or
maintenance.

The information provided in this manual was deemed accurate as of the publication date. However,
updates to this information may have occurred. To obtain the latest version of this manual, please
visit the Crown website at www.crownaudio.com.

Trademark Notice:

 Crown, Crown Audio and Amcron are registered trademarks of Crown

International. Other trademarks are the property of their respective owners.

Some models may be exported under the name Amcron.

®

VCA-MC Series Operation Manual

VCA-MC8

1-VCAP

4-VCAP

135504-5
     5/08

VCA-MC4A

©2008 Crown Audio

®

 Inc., 1718 W. Mishawaka Rd., Elkhart, IN 46517-9439 U.S.A.

Telephone: 574-294-8000

Summary of Contents for 1-VCAP

























Reviews: