Parts Names
Before operating the product, please refer to the diagram below to confirm
various parts of the headphones.
1
2
6
6
2
3
3
4
4
5
5
1
Headband
4
Housing
2
Hinge (Adjustment Angle 50 °)
5
Ear Pad
3
Joint (Adjustment Angle
±
15 °)
6
Headphone Jack
CZ-1 Stereo Headphone
Instruction Manual
Thank you for purchasing the CROSSZONE CZ-1 headphones. For proper use,
please read this manual carefully. In addition, please put the instruction manual
and warranty card away for future reference.
Safety Precautions
Safety issues have been taken into full account while designing this product.
Incorrect use of the product may cause accidents. In order to prevent the
occurrence of accidents, please follow the instructions below.
This icon indicates a situation which
could result in death or severe injury
to persons who disregard these
instructions and handle the product
incorrectly.
This icon indicates a situation
which could result in personal
injury or physical damage, if these
instructions are disregarded and
the product is handled incorrectly.
•
Never use this product during
the operation of automobiles,
motorcycles, bicycles and other
vehicles, so as to avoid traffic
accidents.
•
Never use the product at dangerous
places (railway crossings, stations,
construction sites, roads with running
vehicles or bicycles) so as to avoid the
occurrence of accidents due to the
failure to hear your surroundings.
•
Do not listen at high volume levels
for long periods of time to prevent
hearing damage.
•
If you feel your skin uncomfortable
during use, please stop using it
immediately
•
Do not disassemble or attempt to
repair this product by yourself.
Precautions for Use
•
Please read the instruction manual of the audio device carefully before using it.
•
Please pay attention to adjust the volume in the public transport facilities and
public places, so as not to disturb others.
•
Turn down the volume of the audio device prior to connecting the headphones.
•
This product is made of metal materials. Depending on the seasons, it may
give you the feeling of cold when you touch it, and it may generate static
electricity.
•
Do not throw, hit or drop this product, otherwise malfunction may be caused.
•
If this product is not in use for a long time, please keep it in a dry and clean
place.
•
Hold the headphone connector plug to connect and unplug it. Do not pull the
headphone cable, otherwise the headphone cable may break.
Product Specifications
Design and specifications are subject to change without notice.
Device Type
Closed Dynamic Stereo Headphone
Frequency
Range
20Hz~40kHz
Impedance
75
Ω
Sound Pressure
Sensitivity
97dB/mW
Weight
Approx.485g (Body Only)
Accessories
1.5m Headphone Cable (
Φ
3.5mm Plug),
3.5m Headphone Cable (
Φ
6.3mm Plug),
Φ
3.5mm
⇔
6.3mm Plug Adaptor,
Instruction Manual, Warranty Card
Made in Japan
