![background image](http://html.mh-extra.com/html/crestron/pmk-15l/pmk-15l_installation-manual_2684514001.webp)
Pre-Construction Mount Kit:
PMK-15L
Description
Installation
The PMK-15L is a pre-construction mount kit for the
Crestron Isys
®
TPS-15L and TPS-15G-L wall mounted
touchpanels. The PMK-15L can also be used with the Isys
i/O™ TPMC-15-CH-L and TPMC-15-QM-L wall
mounted touchpanels. The PMK-15L is used for
installation on a stud. For custom touchpanel placement
without a stud, use the WMKT-15L or the WMKM-15L.
The PMK-15L includes an 18 AWG bus wire to secure
touchpanel cabling prior to drywall installation and to
avoid damaging the cables when the opening is routed.
Refer to the physical views (bottom, side, and front) of
the PMK-15L, shown after this paragraph. The table that
follows lists all parts included with the PMK-15L.
The PMK-15L consists of a single metal plate, which
fastens to the stud of a framed wall prior to hanging
drywall (shown after this paragraph). Standard drywall
nails or screws to attach the PMK-15L are not supplied
(length can vary).
Metal Plate Secured to Stud
.
Use inside edge for cutting drywall
NOTE:
This mounting kit is to be used only with the
TPS-15L, TPS-15G-L, TPMC-15-CH-L, and TPMC-15-
QM-L series of touchpanels.
The plate is designed to provide the necessary support for
a single touchpanel and can mount to the right or left side
of a stud. Confirm that the PMK-15L is level before
application of drywall. A rectangular opening with the
dimensions shown in the illustration after this paragraph
must be made in the drywall. Verify that the opening
exposes the #6-32 tapped holes in each corner.
PMK-15L Physical Views
FOR DRYWALL NAIL
(PROVIDED BY OTHER)
FOR DRYWALL SCREW
(PROVIDED BY OTHER)
SECURE 18 AWG BUS WIRE
IN NOTCH TO HANG CABLES
AWAY FROM DRYWALL
CUTTING TOOLS
FOR DRYWALL
NAIL (PROVIDED
BY OTHER)
FOR DRYWALL NAIL (PROVIDED BY OTHER)
13.36 in
(33.93 cm)
0.03 in
(0.08 cm)
13.59 in
(34.53 cm)
1.31 in
(3.33 cm)
13.79 in
(35.02 cm)
15.75 in
(40.01 cm)
FOR DRYWALL SCREW (PROVIDED BY OTHER)
Dimensions for Drywall Cutout
~13
7
64
in
(333 mm Max)
DO NOT EXCEED
THIS DIMENSION
~12
61
64
in
(329 mm Max)
~12
3
4
in
(324 mm Max)
~
5
64
in
(2 mm Max)
~
3
16
in
(5 mm Max)
Ø ~
3
16
in
(5 mm Max)
TYP (4X)
~6
13
64
in
(158 mm Max)
~13
1
2
in
(343 mm Max)
DO NOT EXCEED
THIS DIMENSION
~3
21
32
in
(93 mm Max)
~1
5
64
in
(28 mm Max)
TYP (4X)
If the opening for the touchpanel in the drywall is too
large, two pre-construction accessories are available to
make adjustments. Use the optional TMK-15L (Trim
Ring Kit) to provide a smooth edge at the opening. This
option provides a finished appearance and is preferred
when wallpaper is hung. Use the optional MMK-15L
(Mud Ring Kit) to fill in larger irregularities around the
opening (requires plastering).
Supplied Components
DESCRIPTION
PART NUMBER QUANTITY
Metal, Plate, Mounting
2012866
1
Metal, Plate,Cover
2012865
1
Screw, #6-32, 1-1/2”L, Pan, Phil
2007254
8
Jumper wire, 12”L, 18AWG, Black
2007838
1
Complete the installation by either installing the
touchpanel, leaving the hole open (if permitted by local
building codes), or installing the supplied cover plate with
the included #6-32 x 1½” screws (shown after this
Crestron Electronics, Inc.
Installation Guide – DOC. 6363
15 Volvo Drive Rockleigh, NJ 07647
(2013139)
Tel: 888.CRESTRON
07.05
Fax: 201.767.7576
Specifications subject to
www.crestron.com
change without notice.