CRAIN No. 745 & No. 995 HEAT GUNS LIMITED WARRANTY
Crain warrants this heat gun to be free from defects
in material and workmanship under normal use and
service within 6 months from the date of purchase
and guarantees to either repair or replace at our op-
tion, at no cost, any part that in our judgment shows
evidence of such defect within 6 months from the
date of purchase.
Not covered are the elements, motor brushes, normal
wear and tear, or if the product has been misused,
abused, altered, tampered with, or plugged into an
electrical outlet with voltage other than specified on
nameplate.
All transportation charges on parts submitted for
replacement or repair under this warranty must be
borne by the purchaser.
This warranty does not cover motor brushes or nor-
mal wear, and does not apply if the gun has been
abused, altered, or not used with current specified on
the nameplate. Upon expiration of the warranty peri-
ods, the manufacturer shall have no further warranty
obligations, expressed or implied.
Crain Cutter Co., Inc.
1155 Wrigley Way
Milpitas, CA 95035
1995-210
1995-240
1995-270
1995-300
1995-150
1995-060
1995-030
1995-120
1995-390
1995-420
1995-180
1995-330
(Includes:
1995-180)
1995-360
Handle &
Fasteners
(Cord & leads
sold separately)
BLUE TO
ELEMENT
BLUE TO
ELEMENT
GREEN TO
GROUND
GREEN
SWITCH
BLACK -
SWITCH
GREEN TO
NOZZLE
GROUND
GREEN
GROUND -
NOZZLE
RED TAB
TO TOP
BRUSH
GREEN SWITCH
& CORD GROUND
BLUE TO
BOTTOM
BRUSH
RED TO
FIELD
1745-030
1995-450
1995-090
WHITE
RETURN INSTRUCTIONS:
Send complete unit prepaid with
request for repair including a brief
note describing the problem.
“In-Warranty” repaired guns will
be returned promptly, prepaid.
IF YOUR HEAT GUN NEEDS FACTORY SERVICE
PART # DESCRIPTION
1995-030 Nozzle Shield
1995-060 Nozzle
1995-090 Trigger Guard
1995-120 Toggle Switch and Nut
1995-150 Mica Sheet
1995-180 Intake Cover & Retainer Ring
PART # DESCRIPTION
1995-210 Stand
1995-240 Stand Screw and Nut
1995-270 Brush Cap Set (2)
1995-300 Brush & Spring Set (2)
1995-330 Motor Cover & Fasteners
PART # DESCRIPTION
1995-360 Handle Set w/Fasteners
1995-390 Power Cord & Strain Relief
1995-420 Fan and Set Screw
1745-030 745 Element & Mica (750˚)
1995-450 995 Element & Mica (1000˚)
