CPI LD Series User Manual Download

Page: 1 / 29

CPI User Manual for Lithium Ion Online UPS

04/22v.1

Page 1

User Manual for

Lithium Ion Online UPS

LD-Series,

1500VA, 2000VA and 3000VA Models

Reference Sales Model: LDxxxxA, LDxxxxB

Version 1

April 2022

Reference Sales Model: VLxxxx

Version 1

April 2022

While every effort has been made to ensure the accuracy of all information, CPI does not accept liability for any

errors or omissions and reserves the right to change information and descriptions of listed services and products.

eConnect, Evolution, GlobalFrame, MegaFrame, Motive, QuadraRack, RMR, Saf-T-Grip, Secure Array,

SeismicFrame, SlimFrame, TeraFrame and Velocity are federally registered trademarks of Chatsworth Products.

CUBE-iT, EuroFrame, Simply Efficient and ZetaFrame are trademarks of Chatsworth Products.

All other trademarks belong to their respective companies. 04/22 MKT-60020-765

800-834-4969

chatsworth.com

[email protected]

Summary of Contents for LD Series






























Search results

Summary of Contents for LD Series

Reviews:

Related manuals for LD Series

Brands by name

Popular brands

CPI LD Series, User Manual

Search results

Summary of Contents for LD Series

Reviews:

Related manuals for LD Series

Brands by name

Popular brands