![background image](http://html.mh-extra.com/html/cooltek/coolforce-2/coolforce-2_installation-manual_2661367001.webp)
Congratulaons for choosing Cooltek „CoolForce 2“ CPU cooler.
With purchase of „CoolForce 2“ you got one of the most powerful low-noise
CPU coolers for HTPC-systems at present. Years of experience and development
are the base for „CoolForce 2“. We are sure that you will be sasfied with this
model for many years.
The outstanding performance of this cooler is based on the „Heatpipe Direct
Touch“ technology and an ingenious heatsink design in combinaon with a
noise-opmized 100 mm fan.
Three high-end heatpipes (diameter 6 mm) are embedded in the base plate
of the cooler. The copper heatpipes are in direct contact (“direct touch”) with
the CPU surface conducng the CPU heat extremely fast to the aluminum fins
of the heatsink. The innovave design offers a very large surface and a fast
deducon of the heat.
The extra flat and silent 100 mm PWM fan is controlled by temperature
(500 to max. 2000 rpm). The number of revoluons is adjusted automa-
cally to the temperature of your CPU. In the interest of a most possible
low noise level the fan is equipped with a special long-lasng hydraumac
bearing in combinaon with airflow-opmized rotorblades. In addion the
fan is mounted to the heatsink noise- and vibraon isolated with special
rubber bolts.
The cooler comes with universal installaon kits for all up to date Intel- (LGA
775, 1366 & 1156) and AMD-plaorms (K8, 754, 939 & 940, AM2, AM2+
and AM3).
Please read the enclosed manual very carefully and carry out mounng with
cauon.
Cooltek „CoolForce 2“ CPU cooler
for Intel- & AMD-systems
Installation for Intel LGA 775/1366/1156:
Step 1:
Aach the fing according to the drawing to the
heatsink. The bigger fings are for Intel LGA
1156/1366, the smaller fings suit to LGA 775.
Step 3:
Take the backplate which fits to your system and put it under your mainboard. Please remove the
plasc sheet to improve fixing of backplate.
Step 2:
Apply some thermal grease in the center of your CPU
and allocate it carefully and as thin as possible (e.g.
using an old credit card). But please noce that coolers
based on the “HDT”-technology need more thermal
grease than other coolers
ACCESSORIES
CPU cooler
Fan
Fan mount (rubber) (4)
Backplate for Intel
LGA 775
Backplate for Intel
LGA 1366
Backplate for Intel
LGA 1156
Bolt with spring (4)
Phillips screw (2)
Fing for Intel LGA
775 (2)
Fing for Intel LGA
1366/1156 (2)
Clip for AMD AM2/3 (2)
Thermal Grease
Backplate for Intel LGA 775
Backplate for Intel LGA 1366
Backplate for Intel LGA 1156
Thermal Grease