1
COM-2(PCI)H,4(PCI)H,8(PCI)H
w w w . c o n te c . c o m
Ver.3.30
RS-232C Serial I/O Board for PCI 2ch
COM-2(PCI)H
RS-232C Serial I/O Board for PCI 4ch
COM-4(PCI)H
RS-232C Serial I/O Board for PCI 8ch
COM-8(PCI)H
Product Configuration List
- Board
[COM-2(PCI)H, COM-4(PCI)H or COM-8(PCI)H]
- First step guide
…
1
- COM Setup Disk(CD-ROM *1 )
…
1
*1: The CD-ROM contains the driver software and User's Guide.
This board is a PCI bus interface board for performing RS-232C
serial communications with external devices.
The <COM-2(PCI)H> has two serial ports per board.
The <COM-4(PCI)H> has four serial ports per board.
The <COM-8(PCI)H> has eight serial ports per board.
You can use the standard COM driver software (COM Setup Disk)
supplied with the board to access the serial ports as standard
Windows or Linux COM ports.
The COM-2/4/8(PCI)H boards are backward compatible with the
CONTEC COM-2/4/8(PCI) boards. The COM-x(PCI)H can
therefore replace the COM-x(PCI) in an existing system.
Features
- Maximum communication speed = 921,600bps.
- The baud rate can be set independently for each channel, by
software.
- Each channel is equipped with separate 128-byte FIFO buffers for
transmit and receive.
- A maximum of 16 boards can be installed as configured in the range
COM1 - COM256.
- Driver software is supplied to allow the serial ports to be used as
standard Windows or Linux COM ports.
- The boards use the same easy-to-use 9-pin D-SUB connectors as
are used on a PC.
Cable & Connector (Option)
RS-232C Straight Cable with D-SUB9P (1.8m) : RSS-9M/F
RS-232C Cross Cable with D-SUB9P (1.8m) : RSC-9F
RS-232C Straight Cable with D-SUB25P (1.8m) : RSS-25M/F
RS-232C Cross Cable with D-SUB25P (1.8m) : RSC-25F
RS-232C Connection Conversion Straight Cable (25M 9F, 1.8m)
: RSS-25M/9F
RS-232C Connection Conversion Straight Cable (25F 9M, 1.8m)
: RSS-25F/9M
RS-232C Connection Conversion Cross Cable (25F 9F, 1.8m)
: RSC-25F/9F
Connection Conversion Cable (37M 9M x 4, 250mm)
: PCE37/9PS
Connection Conversion Cable (37M 25M x 4, 250mm)
: PCE37/25PS
Connection Conversion Cable for RS-232C (37M 25M x 4, 450mm)
: COM-4MCABLE(PC)1
Connection Conversion Cable (78M 9M x 8, 1m)
: PCE78/9PS
Connection Conversion Cable (78M 25M x 8, 1m)
: PCE78/25PS
COM-8ch Board Optional Cable for CCU-78F/25M (2m)
: RSS-78M
COM-4ch Board Optional Cable for CCU-78F/25M (2m)
: RSS-78M/37M
Set of five 9-pin D-SUB (male) connectors
: CN5-D9M
Set of five 9-pin D-SUB (female) connectors : CN5-D9F
Set of five 25-pin D-SUB (male) connectors
: CN5-D25M
Set of five 25-pin D-SUB (female) connectors : CN5-D25F
Set of five 37-pin D-SUB (male) connectors
: CN5-D37M
Set of five 78-pin D-SUB (male) connectors
: CN5-D78M
Accessories (Option)
Connection Conversion Unit for RS-232C(78P 25P x 8)
: CCU-78F/25M *1
*1 The option cable RSS-78M or RSS-78M/37M is needed.
The specification, color, and design of a product may be changed without a preliminary announcement.
