background image

Connects2

Vision

www.c2vision-eu.com

www.c2vision-eu.com

U s e r   M a n u a l

Universal Wheel Mount Reverse Camera

with a spare wheel mount bracket. Includes 5 different 

viewing angles viewable with a Wireless Controller

PRODUCT FEATURES:

CAM-JP2

Image Sensor: 1/4”

TV Lines: 480

Resolution: 720 x 480

Minimum Illumination: 0.1 Lux

TV System: NTSC

Waterproof Rating: IP67

Viewing Angle: 210 Degrees

Parking Lines: Yes (Removable)

Image Adjustment: Yes (up to 5 different viewing modes)

Enhanced Performance In Low Light: Yes 

Operating Voltage: 12-24V DC (Negative Ground)

Operating Temperature: -20 Degrees C to +75 Degrees C

Prior to Installation

Read the manual prior to installation.  Technical knowledge is necessary for installation. 

The place of installation must be free of moisture and away from heat sources. Please 

ensure you use the correct tools to avoid damage to the vehicle or product.

Connects2 can not be held responsible for the installation of this product. 

Technical Support

Connects2 want to provide a fast and suitable resolution should you encounter any 

technical issues. With this in mind, when contacting Connects2, try to provide as 

much Information as possible.  This will speed up the process and help us to help you.

Please use our dedicated online technical support centre: support.connects2.com

DISCLAIMER:

Summary of Contents for Vision CAM-JP2

Page 1: ...g Temperature 20 Degrees C to 75 Degrees C Prior to Installation Read the manual prior to installation Technical knowledge is necessary for installation The place of installation must be free of moisture and away from heat sources Please ensure you use the correct tools to avoid damage to the vehicle or product Connects2 can not be held responsible for the installation of this product Technical Su...

Page 2: ...ect the CAN blue and CAN white wires from the harness to the locations specified in the diagram Pins 1 and 9 1 Red Acc 12V Connect to vehicle 12V Accessory feed 2 Black Ground Connect to source of ground 3 Green Reverse Output Connect to aftermarket radio reverse trigger input 4 Purple Reverse Trigger Connect to vehicles reverse light for reverse gear trigger 5 Blue CAN Connect to rear of OBD conn...

Page 3: ...lected viewing mode is displayed by the icon in the centre of the HUD menu This will default to Driving Rear View mode or to Reversing mode when in reverse gear To change the camera mode whilst the vehicle is in reverse gear press B or C to cycle through the Reversing Wide Angle and Birds Eye viewing modes Start Up HUD Menu Switch to Wide Angle Switch to Birds eye Go to Settings Currently selected...

Page 4: ... the previous screen Press and hold A Activating Deactivating Blind Spot View BSV Mode When in any of the settings screens a long press of B will activate or deactivate BSV Blind Spot View When active this will trigger the blind spot camera image when an indicator is activated and the vehicle is moving at a speed of over 40km h When inactive using the indicators will not trigger the blind spot vie...

Reviews: