FO
S
-
13 / FOS-19
FOB-21 Installation guide
Page 1
COMTECH ltd.
i n
s t a l l a t i o n
g u i d e
We congratulate you on purchasing our company's
fiber-optic
termination box FOS-13 / FOS-19
!
Technical specification:
Weight: about. 5 grams
Incoming cable up to 9 mm
One SC or one DuplexSC adapter
Dimensions 91.5*76.5*25 mm
6
Made from high-class ABS plastic
Wall mounting fiber termination box FOS-13 and FOS-19
are
devised for fiber-optical cable termination and
connection of end-user equipment to data transmission
network.
We are producing two types of termination boxes –
FOS-13 which is devised for SC type adapters and
FOS-19 for
Duplex-SC type adapters.
Adding of pigtails is possible either using weldin
g
40 mm
HSP (heat shrink protector))
or using mechanical
connector. Our termination box has fixators for both
types of connectors. Termination box is devised for
incoming optical cables up to 9mm diameter.
Incoming cable is fastened with two plastic cable ties.
I
nside of the termination box you can also find cable reel
with fixators for fiber and pigtail as well. You can fix box to
the wall by using two 4mm screws.
Wall mounting fiber termination box consists of two parts -
the base where you can find fixators for incoming cable,
cable reel, fixators for connectors, SC or Duplex-SC
adapter and box lid. The last one is fixating to the bottom
with elastic clips without any screw. For lid removing you
need flat-head screwdriver. The lid exterior has place for
box label. The box is made from white ABS plastic.
Bigger orders has place for negotiations about different
colors.
