INS_FVT/FVR10D1E_REV–
12/28/09
PAGE 1
INSTALLATION AND OPERATION MANUAL
FVT/FVR10D1E(M,S)[M]
10-BIT DIGITALLY ENCODED VIDEO TRANSMITTER
WITH 1 BI-DIRECTIONAL DATA CHANNEL
AND 10/100MB ETHERNET
The FVT/FVR10D1E is a single (1) channel ten (10) bit video transmission
system along with one channel of bi-directional data and one full duplex
10/100 Mbps Fast Ethernet port.
The data channel is configured using a two position switch to operate as RS232,
RS422 or RS485, either two (2) wire or four (4) wire. See
Figure 7
for details.
The video channel also supports “up-the-coax” reverse data that is enabled
automatically.
The Ethernet uses a RJ45 data connector. The data input/output also uses
an RJ45 data connector and a “breakout box” to facilitate attachment of the
external wires. The breakout box and connecting cable are supplied with the
FVT/FVR10D1E module.
The FVT/FVR10D1E may be directly plugged into the ComNet Rack (Part #C1)
or operated as a standalone module powered by the PS-9VDC power supply
also provided with the module.
The FVT/FVR10D1E requires one optical fiber and may be supplied in a
multimode (M) or singlemode (S) version.
See
Figures 1 – 11
for complete installation details.
