background image

GENERAL INFORMATION

• Top of pole mounting option

   Fits round members 2.4" to 3.6" (60 to 92 mm) pole 

   diameter.
• Offset of pole mounting option

   Fits round members 1.9" to 3.8" (50 to 97 mm) pole

   diameter.
• Wall mounting option 

PRE-INSTALLATION INSTRUCTIONS

• Examine antenna and hardware to ensure that all 

   parts are enclosed and that there is no physical

   damage.
• Verify that the frequency range shown on the label

   on the bottom of the antenna matches the frequency

   range of the station equipment.

Wear shoes with rubber soles and 

heels. Wear protective clothing

including a long-sleeved shirt and 

rubber gloves.

Do not install near power lines. 

Power lines, telephone lines, 

and guy wires look the same. 

Assume any wire or line can 

electrocute you.

Do not install on a wet or windy 

day or when lightning or thunder 

is in the area. Do not use metal 

ladder.

Note: this is only recommended for building mounts or applications

   with no significant side wind load.

PARTS LIST

                                       SAFETY NOTICE

The installation, maintenance, or removal of an antenna

requires qualified, experienced personnel. CommScope

installation instructions are written for such installation 

personnel. Antenna systems should be inspected once a 

year by qualified personnel to verify proper installation, 

maintenance, and condition of equipment.
CommScope disclaims any liability or responsibility for the 

results of improper or unsafe installation practices.
It is recommended that transmit power be turned off 

when the field installation is performed. Follow all 

applicable safety precautions as shown on this page.

Item

Description

Qty

Image

1

 Side Mount Bracket

1

2

 Top Mount Bracket

1

3

 Pipe Clamp Bracket

3

4

 Wall Mount Adapter

1

5

 Pipe Clamp Bracket

1

6

SPACER TUBE

1

7

 M10 X 198  Threaded Stud

3

8

 M10 X 138  Threaded Stud

3

9

M10 Flat Washer

18

10

 M10 Hex Nut

32

11

 M10 Lock Washer

2

Item

Description

Qty

Image

12  M10 X 30 Hex Head Bolt

2

13  M24 X 75 Hex Head Bolt

1

14  M24 Flat Washer

3

15  M24 Hex Nut

2

16  M12 X 180  Threaded Stud

2

17  M12 X 245  Threaded Stud

2

18  M12 Flat Washer

8

19  M12 Hex Nut

16

20  M6 Screw with Tube

1

21  M6 Lock Washer

1

22  M6 Flat Washer

2

23  M6 Hex Nut

1

www.commscope.com

© 2016 CommScope, Inc. All rights reserved.

Visit our website at www.commscope.com or contact your local CommScope representative or BusinessPartner for more information.

All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope, Inc. 628906 B (05/16)

Page 1 of 8

628906     Revision B,     May 2016

MC-MNT-3XV-TS1 Mounting Kits

Mounting Kit For Metro Cell Antennas

Summary of Contents for MC-MNT-3XV-TS1









Reviews: