background image

Combi Child Car Seat

THE S ISOFIX EGGSHOCK

Before Use

Using Each Part

Installing to and 

Uninstalling from 

the Vehicle

User Manual

This product is an ISOFIX child car seat for 

specific

 vehicles, 

and is certified according to the UN R129/03 standard.

 This product can be installed to vehicle seats approved 

for installation of ISOFIX child car seats. 

  However, this does not mean that this child car seat can 

be installed  to  any  vehicle  seat  equipped  with  ISOFIX 

anchors 

(bars). When using the child car seat, always 

check the vehicle compliance and check the user manual 

of the vehicle.

 Applicable child height and weight: Heights up to 

105

 cm or 

weights up to 19.0 kg

For the safety of the child, please read this user manual

carefully before use and use the child car seat properly. 

To avoid causing stress to the child, avoid continuous 

long-time usage and give the child a break from the 

child car seat about once every hour.

 

 

 

● 

Store this user manual in the storage pocket of the 

base cover.

 

 

Maintenance and 

Other

Do not use forward facing before the child’s age exceeds 

15 months or before the child’s height exceeds 76cm. 

 

 

DANGER

CAUTION

Summary of Contents for EGGSHOCK

















































Reviews: