Connect Frame to Tent
–Start with the center Grey main pole.
Insert the pin into the end of the grey
main tent pole at tent’s edge. (illus. 3 & 4)
–Go to opposite end of pole and
gradually apply pressure to the pole
forming an arch until you are able to
insert the pin into the opposite pole end.
–Repeat for two black main poles.
Lakeside
™
15’x10’
1
Layout & Positioning
of Tent, Pole Assembly
–Layout and position tent with door
facing desired direction. (illus. 1)
–Unzip doors.
–Stake down tent corners only, using the
stake loops. Keep the floor taut.
(Intermediate loops will be staked later.)
–Assemble frame poles by interlocking
shock-corded poles. (three poles)
–Insert the grey pole straight through the
center pole sleeves in the middle of tent.
Then insert black poles straight through
outside pole sleeves. (illus. 1)
2
When You Are Ready To Set
Up Your Tent
–Select a level campsite clear of
rocks, branches and other hard or
sharp objects.
–Do not set up your tent under trees.
–For best results in windy conditions,
position the end of tent into the wind.
–See owners manual for more tips.
Assembled
Black main
poles
inserted
through
pole sleeves
Grey main pole
through center
sleeves
Instructions apply to Part Number 9163-150
illus. 1
illus. 2
Tent stake
through
stake loop
illus. 4
Tent frame set-up
Main Poles
Part No. 9163-503
Main Pole
Part No. 9163-505
Rainfly Poles
Part No. 9163-504
illus.3
Insert pin
into pole end
Rainfly
Part No. 9163-502
Main Tent Poles (Black)
Main Tent Poles (Grey)
Grey Pole
Black Pole
Black Pole
