SPECIAL NOTES
KL1O
Installation and Operating Instructions
Please read carefully:
•
Before installing the lock, familiarise yourself with the installation and operating instructions.
•
The factory preset combination is 0-0-0-0.
•
Your KitLock is supplied ready to fit to doors up to 19mm (
3
/
4
”) thick.
FITTING INSTRUCTIONS
The KitLock can be fitted to cabinets, cupboards and lockers etc. as a direct replacement for existing cam locks.
It can also be fitted easily to cupboards and cabinets that do not have an existing locking device.
INSTALLATION GUIDE
Replace existing cam lock with KitLock
A
Step 1 Remove existing cam lock.
Step 2 Fit the KitLock to the door, passing the
spindle through the existing hole.
Step 3 Now secure the lock by threading the hex nut
onto the spindle.
Step 4 Fit cam and secure with screw.
Step 5 Now check the operation of the lock using the
factory preset combination 0-0-0-0.
Step 6 If the lock is functioning correctly, change the
code using the instructions overleaf.
New Installation
B
Step 1 Mark a position at a suitable distance from
the door edge, ensuring enough clearance
for the cam to work.
Step 2 Using the ‘Typical Door Prep.’ dimensions
(see overleaf), drill a hole to suit..
Step 3 Continue installation from step 2 to 6, left.
KitLock
Hex nut x 1
1
2
3
4
Straight cam x 1
Screw x 1
1.
2.
3.
4.
Fixing Pack A
Default Supply
Metal Clip x 1
Screws x 2
1
2
3
4
Washer x 1
Crank Cam x 1
Fixing Pack B
Optional Additional Fixings
1.
2.
3.
4.
N.B.
Optional
Fixing Pack B
(above) may be required.
