Cleveland
™
Project ________________________________
Item __________________________________
Quantity _______________________________
FCSI Section ____________________________
Approval _______________________________
Date __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: 1-216-481-4900
Fax: 1-216-481-3782
Web Site: www.ClevelandRange.com
Email: [email protected]
MIXER KETTLES
MIXER KETTLE, ELECTRIC
FLOOR TYPE, LEVER TILT
2/3 STEAM JACKETED
MODELS
:
c
MKET-20-T
Cleveland Standard Features
n
Solid State Temperature Control (±1°F) for perfect
simmering
n
Solid State Low Water Safety Control
n
Steam jacket filled with treated water, venting and/or refilling is
not required
n
50 psi Safety Valve mounted under kettle to avoid
tampering
n
No Water Gauge required
n
Rear mounted Pressure/Vacuum Gauge and Pressure Relief
Valve protected by Stainless Steel Bracket
n
Infinitely variable speed for all conditions; Scraper from 0-70
rpm, Agitator from 0-210 rpm
n
Removable (without tools) Nylon Blades scrape entire
Jacketed surface
n
3/4 Horsepower D.C. Timing Belt
n
Safety device prevents high speed starts
n
Mixer stop when Bridge is lifted
n
Agitator and Scraper are bayonet mounted for easy removal
n
Totally enclosed, balanced, 10 gauge Stainless Steel Mixer
Bridge
n
Kettle and all exterior surfaces are Stainless Steel
n
Double Pantry Faucet Standard
n
Level adjustable feet (flanged for bolting)
n
Large Pouring Lip
n
Gallon markings on Scraper Shaft
n
Standard 120/208-240 volts, 60 Hz, 3 phase, 4 wire
n
Typical approvals include UL., CSA, CE, NSF and ASME
Options & Accessories
p
Covers (MTP20)
p
Food Strainer (FS-20)
p
Flow Diverter (FD)
p
Kettle Accessory Kit (KAK) includes:
p
Clean-up Brush (CB)
p
36˝ Kettle Paddle (KP)
p
36˝ Kettle Whip (KW)
p
36˝ Kettle Brush (KB)
Shall be CLEVELAND, Model MKET-20-T, floor type lever tilt, 20 gallon, elec-
tric mixer kettle with permanently filled Steam Jacket; 50 psi Jacket Rating
and Safety Valve, Solid State Temperature (±1°F) and Low Water Safety
Controls, rear mounted Combination Pressure / Vacuum Gauge, infinitely
variable Speeds. 3/4 H.P. Timing Belt Drive, Bayonet Mounted Agitator and
Scraper with removable blades, safety device prevent high speed starts,
mixing stops when bridge is lifted. Kettle and all exterior surfaces are
Stainless Steel. Double Pantry Faucet standard.
p
Draw-off Brush (DB)
p
24 oz. Ladle (KL)
p
Type 316 Stainless Steel Interior for high acid food products
(316-20G)
p
Water Meter (GMF or LMF) Wall Mount or on Stand (SWM)
p
High wattages (HW) and special voltages (VOS)
Short Form Specifications
SECT.
XI
PAGE
3
0707
