background image

English

GREAT BRITAIN •

 

customer service

 

tel:

 020 8247 9300 

e-mail

 [email protected] 

internet

 www.clasohlson.co.uk 

postal

 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ

Ver

. 20170921

Solar String Light

Art.no 36-6988  Model TN-8041

Please read the entire instruction manual before use and 
then save it for future reference. We reserve the right for any 
errors in text or images and any necessary changes made 
to technical data. In the event of technical problems or other 
queries, please contact our Customer Services.

Safety

 Important

•  Handle the product with care, making sure not to damage 

the surface of the solar cell and ensuring that it is not 
covered with dust or affected by other contaminants.

•  Never attempt to repair or modify the product in any way.
•  Repairs must only be carried out by authorised service 

personnel and only using genuine spare parts.

•  The battery must only be replaced with a rechargeable battery.
•  Never let children play with the product.

 Information

Solar cell

Placed on a ground spike

Care and maintenance

•  Clean the product using a slightly damp cloth. Use only mild 

cleaning agents, never solvents or corrosive chemicals.

•  Replacing the battery, when required:

The string light can also be 
powered by a battery pack 
or a mains adaptor (both sold 
separately) to enable them 
to be used all year round. 
Disconnect the solar cell and 
replace it with either a battery 
pack or mains adaptor.

Assembly

 Information

•  When placing the product outdoors, make sure that it has 

access to maximum sunlight and is not affected by other 
light sources such as street lights.

•  When the battery is fully charged, the light will shine for 

approximately 8 hours in the dark.

1.  Attach the ground spike 

to the solar cell and 
then push the spike into 
the ground.

2.  Adjust the angle of 

the solar cell to receive 
as much sunlight as 
possible.

Fastened to a structure such as a wall

1.  Remove the nuts/bolts on 

the bracket on the back of 
the solar cell.

2.  Using the bracket as a guide, 

mark out the position of 
the mounting holes on the wall.

3.  Use an appropriate type 

of screw or fastener for 
the material and mount 
the bracket to the wall. 

 

Important: 

Make sure that there are no electrical wires 

or water pipes in the wall where you intend to drill/screw.

4.  Screw the solar cell onto the bracket.
5.  Adjust the angle of the solar cell so that it receives as much 

sunlight as possible.

Lighting

Hang the string light in the desired location.

Instructions for use

1.  Connect the lights and 

the solar cell’s plugs.

2.  Set the switch on the back of the solar cell to 

W

 for a fixed 

white light or to 

G

 for a green light.

3.  The lights will come on automatically at dusk.

Troubleshooting

What to do if the lamp does not shine.
•  Check that the power switch is in the 

W

 or 

G

 position.

•  The battery is discharged. Make sure the solar cell is 

exposed to sunlight.

•  The solar cell is dirty. Clean it by wiping with a damp cloth.

Responsible disposal

This symbol indicates that this product should not 
be disposed of with general household waste. 
This applies throughout the entire EU. In order 
to prevent any harm to the environment or 
health hazards caused by incorrect waste 
disposal, the product must be handed in for 
recycling so that the material can be disposed 
of in a responsible manner. When recycling the product, 
take it to your local collection facility or contact the place of 
purchase. They will ensure that the product is disposed of in 
an environmentally sound manner.

Specifications

Rechargeable battery 

1 × AA/HR06 NiMH 600 mAh

Charging time 

8 hours (in continuous sunlight)

Operating time 

8 hours (when fully charged)

Length 

8.1 m

1.  Remove the 4 screws 

on the back of 
the solar cell.

2.  Change the battery and 

make sure that it is inserted 
with the correct polarity.

Reviews: