![background image](http://html1.mh-extra.com/html/clarsen/h792/h792_instructions-for-use_2616274001.webp)
Drain Cleaner
H792
v01: 14/04/21
Please read and retain these instructions for future reference
Accessories: 5cm, 6cm, 11.5cm, 18cm suckers which can be used in toilet, washbasin, bathtubs, shower, sink,
floor drain, blocked pipes etc. 1pc PE film size around 50 x 50cm to protect from splashing.
How to use
1.
Usage should be based on the size of the blocked pipe diameter, select the appropriate attachment from
the four different sizes. For the toilet choose the largest or the second largest plug mouth.
2.
After the attachment is installed, you can start to inflate the air reservoir by holding the handle firmly in
your left hand and pumping the air pump lever with your right hand completing several full stroke
twitches at least 15-25 times until the pressure is complete.
3.
The attachment needs to sit tight on the small nozzle, if not closed, add water and diffuse the water
through the nozzle to seal. At this point use the trigger for air flow. Obstacles in the drain should be
washed away by strong air flow. This operation can be repeated several times.
Important
Dimensions
27 x 27 x8.5cms
•
Clears blocked drains
•
Comes with 4 adapters to be used
for a variety of plug sizes (sink,
bath, shower) and toilets
•
More efficient way of drain
cleaning without using harsh
chemicals or risking damage to
pipes
•
Easy to use