CSI 825A++
SMD REWORK STATION
INSTRUCTION MANUAL
By: Circuit Specialists, Inc.
Rev. 072503
Key Features
*Controlled by a CPU
*A full Touch switch and a two-way digital display
*Built in Vacuum system for removing the IC Chips after it has been de-soldered. (NOT A
DESOLDERING PUMP)
*Built in sleep mode when not used for 15min.
WARNING:
WARNING: When you first remove this unit from the box. Before turning the unit on,
YOU MUST RE-
MOVE THE SCREW
in the center of the bottom panel. This screw holds the pump in place during
transportation.If this screw is not removed and the unit is turned on it may cause damage to your rework
station.
