CP4400 Series Dual LOS
Pedestal Installation
Instructions
These instructions provide steps to safely install a CP4400 Series projector onto the pedestal. This
pedestal is designed to safely hold CP4400 Series projectors at an adequate height for most projection
rooms.
Affected products
The following products are affected:
•
CP4400 Series projectors
Prerequisites
The following components are required.
•
Christie pedestal kit (P/N: 163-126100-XX)
Required tools
The following tools are required.
•
#3 Phillips screwdriver
•
5 mm flathead screwdriver
•
2.5 mm Allen key
•
3 mm Allen key
•
4 mm Allen key
•
5 mm Allen key
•
24 mm wrench
•
tape measure
Christie CP4400 Series Dual LOS Pedestal Instruction Sheet
1
020-103141-01 Rev. 1 (06-2019)
Copyright
©
2019 Christie Digital Systems USA, Inc. All rights reserved.
