background image

Inverter gas generator

65588

set up, operatIng, and servIcIng 

InstructIons

 

using an engine indoors can KILL You In 

MInutes.
engine exhaust contains carbon monoxide.  

this is a poison you cannot see or smell.

never use inside 

a home or garage, 

even IF doors and 

windows are open.

only use outsIde 

and far away from 

windows, doors, and 

vents.

distributed exclusively by Harbor Freight tools

®

.

3491 Mission Oaks Blvd., Camarillo, CA 93011

visit our website at: http://www.harborfreight.com

 read this material before using this product. 

Failure to do so can result in serious injury. 

save tHIs ManuaL.

Copyright

©

 2008 by Harbor Freight Tools

®

.  All rights reserved.  No portion of this manual or any artwork 

contained  herein  may  be  reproduced  in  any  shape  or  form  without  the  express  written  consent  of 

Harbor Freight Tools.  Diagrams within this manual may not be drawn proportionally.  Due to continuing 

improvements,  actual  product  may  differ  slightly  from  the  product  described  herein.   Tools  required  for 

assembly and service may not be included.

For technical questions or replacement parts, please call 1-800-444-3353.

Summary of Contents for 65588
























Reviews: