Cordless Electric Kettle Hot Pot
™
Model 675
Service
This appliance is for household use only. No user-serviceable parts are inside. Refer servicing to qualified personnel.
In the event post-warranty service is needed, return your Hot Pot
™
to EdgeCraft Corp., where the cost of repair can be
estimated before the repair is undertaken. Please include your return address and a brief description of the problem
or damage to the Hot Pot
™
on a separate sheet inside the box. PLEASE CAREFULLY PACKAGE THE KETTLE TO AVOID
SHIPPING DAMAGE.
Send your Hot Pot
™
, insured and postage prepaid to:
EdgeCraft Corporation
825 Southwood Road, Avondale, PA 19311 U.S.A.
Telephone 800-342-3255 or 610-268-0500
www.edgecraft.com
Retain evidence of shipping for your protection.
Limited Warranty:
Used with normal care, this EdgeCraft product is guaranteed against defective material and workmanship for a period of one (1) year from the date
of original purchase (“Warranty Period”). We will repair or replace, at our option, any product or part that is defective in material or workmanship without charge if the
product is returned to us postage prepaid with dated proof of purchase within the Warranty Period. This warranty does not apply to commercial use or any product
abuse. ALL IMPLIED WARRANTIES, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE
WARRANTY PERIOD. EDGECRAFT CORPORATION SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow limitations
on how long an implied warranty lasts and some states do not allow exclusions or limitation of incidental or consequential damages, so the above limitations or
exclusions may not apply to you. This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
This product may be covered by one or more EdgeCraft patents and/or patents pending as marked on the product.
Conforms to: UL 1082 Certified to CAN/CSA: C22.2 No.64
120 volts/60Hertz, 1500 watts
© EdgeCraft Corporation 2014
C14
T675601
CAUTION:
The Hot Pot always gets hot during operation.
DO NOT
touch the metal body or lid; lift the Hot Pot only by
the handle and lift the lid only by using the lid lever. Exercise care when opening the lid while the Hot Pot is still hot or
contains hot water.
Care and Maintenance of Your Chef’sChoice
®
Hot Pot
• The Chef’sChoice
®
Hot Pot is designed specifically for heating water. Do not attempt to heat anything other than
water in the Hot Pot. (With liquids and mixtures of low water content, the automatic shut-off switch may not
function properly and the Hot Pot may be damaged.)
• Before cleaning make sure power switch is turned off, then remove Hot Pot from base unit. Unplug the base unit.
• Always wait until the Hot Pot has fully cooled to room temperature before cleaning.
• To avoid scratching, only clean the outside of the Hot Pot with a soft cloth. Never use abrasive cleanser.
• The interior of the Hot Pot can be cleaned by decalcification at regular intervals (see below).
• Rinse out the Hot Pot at regular intervals and after extended non-use. Do not immerse.
• Do not attempt to clean any part of the Hot Pot or base in the dishwasher.
Decalcification
In areas with a high lime content in the water supply, the Hot Pot should be decalcified at regular intervals.
• Fill the Hot Pot with a solution of 16 oz. water, add 6 tablespoons of vinegar, and bring to a boil.
• When process is complete, rinse the Hot Pot twice with clean water.
• Commercially available liquid decalcifiers may also be used. Follow the instructions provided with decalcifier
by its manufaturer.
Regular decalcification will keep the Hot Pot operating at peak performance and electrical efficiency. It will also
extend the life of the Hot Pot.
Over time slightly brownish stains may appear inside of the Hot Pot. This is not rusting of the Hot Pot, it is referred to
as boiler scale and is a result of high iron content in the water supply. These stains can be easily wiped away with a
cloth or mild abrasive. Rinse Hot Pot thoroughly.
Boil-dry Protection
This Hot Pot is equipped with a self-resetting “boil-dry” switch which protects the appliance in the event of
improper use. If heating is accidentally started without water or if the water evaporates completely, the appliance
is automatically switched off by a “boil-dry” protection. Try to avoid allowing the Hot Pot to “boil-dry”.
If the “boil-dry” protection is actuated, disconnect the power cord and allow the Hot Pot to cool down for a few
minutes (
CAUTION:
Small amounts of hot water remaining in the Hot Pot can cause scalding injuries) and then refill
with cold water. The Hot Pot will now operate normally.
