background image

4-PIECE AIR

BLOW GUN SET

Air Blow Gun With Standard Nozzle and

Two Extensions

Die-cast Aluminum Frame Body; Steel Trigger Level;

Threaded Die-Cast Zinc Tips

Air Inlet: 1/4” - 18 NPT

Air Discharge: 3/32” Diameter

Maximum PSI: 110 PSI

Overall Dimensions: 4-1/2” L X 5-1/2” H X 7/8” W

OPERATING INSTRUCTIONS

1. Thread the nozzle or the needed extension onto the tip of the

    Air Blow Gun.

2. Attach the Air Blow Gun to the air source hose.  Set the air

    compressor to 30 - 100 working PSI.  Do NOT exceed 110 PSI.

3. Squeeze Air Blow Gun trigger to begin the flow of air.

4. Release Air Blow Gun trigger to stop the flow of air.

5. When finished, turn off the air compressor and then

    disconnect Air Blow Gun from the air source hose

6. Only use clean and dry compressed air. Never use oxygen,

    carbon dioxide, combustible gases or any other bottled gas

     as a power source.

09/06

         Made in China.

For technical questions and replacement parts, please call Harbor

Freight Tools at 1-800-444-3353

1. Always wear ANSI-approved safety goggles when working

    with tools and equipment.

2. Keep out of the reach of children.

3. Store Air Blow Gun Set in a dry and secure location.

4. Do not exceed the maximum air pressure of 110 PSI.

5. Do not modify any part of the Air Blow Gun Set to perform

    any task for which they were not designed.

6. Never point the Air Blow Gun at peoples or animals.

7. Save these warnings.

SPECIFICATIONS

ITEM

95159

Reviews: