background image

Salvo Chock

User Guide

12 of 51

U-Salvo-2013-E Issue 1

Salvo Chock is a device designed to immobilise nonarticulated goods 
vehicles whilst they are being loaded and unloaded. When used in 
conjunction with other Salvo products, it can prevent inadvertent or 
unauthorised drive-aways. It is designed to be deployed on the drivers 
side front wheel of the vehicle. Salvo Chock introduces discipline into 
the chocking procedure by interlocking the chock and the loading bay. 

all of the existing products in the Salvo range, Salvo Chock relies on 
Castell’s time-proven trapped-key technology

Salvo Chock

 

 

1

2

3

When the chock is received, it will 

the Chock ready for use, the Lock 
Support Arm must be secured in 
the operational position.

The Lock Support Arm must be 
raised to the vertical position and 

prevent any movement of the arm. 
The Retention Sleeve (B) should be 
slid into position around the joint in 
the spigot.

To complete the assembly the cover 

provided in 6 positions. The Chock 
is then ready for use.

 

 

Operation

The Salvo Chock is designed as a part of a safety system to prevent accidental drive aways. The Salvo Chock ensures the 
vehicle is locked in position before the loading bay door can be opened

1

2

3

loosely around drivers-side front 
wheel. Rotate the catch anti-
clockwise to the ‘up’ position, as 
shown.

Turn the key anti-clockwise 
to remove.

A

A

B

Before Use

om 3 to 26 tonnes with tyre outside diameter from 27.5 

to 42 inches (700 to 1070 mm).  To prevent the risk of manual handling injury, only move the chock around using the 
mobility handle (see photos under Operating Instructions).

Handle with Care. Beware of pinch points where the two halves slide/telescope together.

Precautions

Pump the pedal until the two chocks 
contact the tyre. Continue pumping 
the pedal until red indicator lines are 
aligned, whilst keeping the pedal 
depressed.

4

5

6

Depress the pedal, insert key and 
rotate clockwise to trap. Allow foot 
pedal to spring to up position.

Separate chocks to 
release from wheel.

Flip the catch clockwise 
to the down position.

TO REMOVE 
CHOCK

Reviews: