Operation Guide 3402
E-9
To set the time and date
1. In the Timekeeping Mode, hold down
A
until the
seconds start to flash, which indicates the setting
screen.
2. Press
C
to move the flashing in the sequence shown
below to select other settings.
Seconds
Home Time zone
Hour
Year
Minutes
Day
DST
Month
Home Time zone
E-8
Timekeeping
Use the Timekeeping Mode to set and view the current
time and date.
Read This Before You Set the Time and Date !
The times displayed in the Timekeeping Mode and World
Time Mode are linked. Because of this, make sure you
select a Home Time zone before you set the time and
date.
Month – Day
Hour : Minutes
PM indicator
Seconds
Day of week
E-7
World Time Mode
Alarm Mode
Countdown Timer Mode
E-6
General Guide
•
Press
C
to change from mode to mode.
•
In any mode (except when a setting screen is on the display), press
B
to illuminate
the display.
Timekeeping Mode
Stopwatch Mode (ST1)
Stopwatch Mode (ST2)
E-5
To turn the Hourly Time Signal on and off ......................................................... E-28
To view the time for another city code ............................................................... E-29
To toggle a city code time
between Standard Time and Daylight Saving Time ....................................... E-30
To illuminate the display manually ..................................................................... E-31
To specify the illumination duration ................................................................... E-32
To turn the auto light switch on and off ............................................................. E-34
To turn Flash Alert on and off .............................................................................. E-37
To turn the button operation tone on and off ..................................................... E-38
E-4
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To set the time and date ......................................................................................... E-9
To toggle the Timekeeping Mode time between DST and Standard Time ....... E-11
To toggle between 12-hour and 24-hour timekeeping ....................................... E-12
To measure times with the stopwatch
(Stopwatch Mode (ST1) and Stopwatch Mode (ST2)) .................................... E-14
To use Auto-Start (ST1) ........................................................................................ E-15
To configure the countdown timer ...................................................................... E-19
To use the countdown timer ................................................................................ E-21
To set an alarm time ............................................................................................. E-24
To test the alarm ................................................................................................... E-26
To turn an alarm on and off ................................................................................. E-27
E-3
Contents
General Guide ......................................................................................................... E-6
Timekeeping ............................................................................................................ E-8
Stopwatches .......................................................................................................... E-13
Countdown Timer ................................................................................................. E-16
Alarms .................................................................................................................... E-22
World Time ............................................................................................................ E-29
Illumination ............................................................................................................ E-31
Reference .............................................................................................................. E-35
Specifications ....................................................................................................... E-44
E-2
•
Note that the product illustrations in this manual are intended for reference only, and
so the actual product may appear somewhat different than depicted by an
illustration.
E-1
About This Manual
•
Depending on the model of your watch, display text
appears either as dark figures on a light background or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
•
Button operations are indicated using the letters shown
in the illustration.
•
Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.
MA12
0
9-EA
Ú#!3)/#/-054%2#/,4$
