DIGITAL LOCKSET COMPONENT PARTS LIST
NEW INSTALLATION
C D L 7 1 0 0 - K D S C D I G I T A L L O C K S E T
INSTALLATION
INSTRUCTIONS
Distributed in Australia by
LOCK AND KEY a division on the
DAVCOR GROUP PTY LTD ABN 95 003 562 598
This product has been manufactured in Taiwan
to Lock and Key Company specifications
This product is guaranteed to be free from defects in materials and
workmanship for a period of one (1) year from the date of original
purchase. This warranty is for replacement of product only and Lock
and Key Company does not accept responsibility for any direct or
consequential damage caused by this product or its use. This warranty
does not cover damage
that results from faulty installation or usage,
alteration or modification of the product or tarnishing of the finish
including colour change due to weather, salt or chemical. Should this
product not perform satisfactorily in its intended application, return it
to place of purchase for replacement.
LOCK & KEY
Phone:
1300 652 692
Web:
www.locknkey.com.au
Web:
www. daveweb.com.au
NOTE
Please dispose of plastic
bags and other packaging
in a thoughtful manner
WARNING
Please keep contents
away from small children.
Suffocation Hazard.
SPECIAL NOTES:
Before commencing installation please check that all components are working correctly.
- Take the front body lock assembly, enter in the factory code
C13579
and turn the handle. Repeat, but turn the handle
in the other direction. The handle should return freely under spring pressure.
- It is important that the code is changed and tested before fitting. See code change instructions for details.
CHANGING THE CODE NUMBER
1) The digital lock is supplied with the default code of C13579
2) Determine the code you want to use and slide the
selectors into position.
3) To do this, depress the code select button and slide it left
or right depending on whether it’s part of the code or not.
4) When the button is showing the red indicator this means
that the corresponding button is part of the code.
5) The CLEAR “C” button MUST always be used before any
code is inputted into the lock.
6) To achieve higher levels of security, it is recommended
that the code should contain 4-5 digits.
7) After the clear button is depressed, the digits can be
entered in any order. EG: In the image shown it would be
possible to enter CW1982 as well as C1289W because any
combination of the digits will unlock the lock.
Code select
buttons
Red indicators
Slide left or right
TOOLS REQUIRED
- Chisel
- 25mm Spade Bit
- 15mm Spade Bit
- 10mm Drill Bit
- Phillips Head Screwdriver
9
10
8
12
6
5
3
2
1
16
4
15
11
14
13
9
10
8
12
6
5
3
2
1
16
4
15
11
14
13
Description
BOM ID Qty
Digital Keypad Assembly
2
Gasket
2
2
1
25mm M5-M5 Hex Lug
3
2
Securing screw
2
Door Mount Plate
5
1
4
25mm M5x0.8 CSK Philips Head 6
2
Digital Pad Plate
1
M5 14mm Screw
9
2
8
Latch Support Post
Screw plug
11
10
2
Notched Tailbar
12
1
Strike Box
13
1
Strike Plate
8GX25mm CSK Wood Screw
15
8
60mm Latch Assembly
1
14
1
16
1
35mm M5x0.8 CSK Philips Head 7
2
NB: Item 7 is not shown in the illustration but is part
of the parts pack.
fig 2
C D
L 7 1
0 0 -
K D
S C
D I
G I T
A L
L O
C K
S E T
FIT
TIN
G
TE
MP
LAT
E
Distribute
d in Australia by
LOCK AND KE
Y a division on the
DAVC
OR GROUP PTY
LTD ABN 95 003 562 59
8
This pro
duct
has been manufacture
d in Taiwan
to Lock
and Key Company sp
ecifications
This pro
duct is guara
nteed to be free fro
m defects in materials a
nd
workmanship for a peri
od of one (1) yea
r fro
m the date of origina
l
purchase. This warr
anty is for replace
ment of pro
duct only and
Lock
and Key
Company does not a
ccept responsibility for any d
irect or
consequential da
mage caused by this pr
oduct or its use. This wa
rranty
does not
cover damage
that results fro
m faulty
installa
tion or u
sage,
alterati
on or modifi
cation of the p
roduct or
tarnishin
g of the finis
h
including co
lour ch
ange due to w
eather, salt or c
hemical. Sho
uld this
product not p
erform sa
tisfactorily in its i
ntended app
lication, return
it
to place of
purchase fo
r replacemen
t.
LOCK & KEY
Phone:
1300 652 692
Web:
www.locknkey.
com.au
Web:
www. davew
eb.com.au
Outline of
Gasket
Centre line of latch
Centre line of latch
24mm
Ø10mm HOLES x 7
( Match to length of LATCH )
Fold along the edge of the door
60mm
Fold along the edge of the door
( Match to length of LATCH )
60mm
41mm
17.5mm
Ø10mm HOLE
100mm Deep
Ø10mm HOLE
100mm Deep
100mm Deep
Ø10mm HOLE
Ø10mm HOLE
100mm Deep
130mm
85mm
30mm
13mm
13mm
Ø15mm HOLES x 4
C D L 7 1
0 0 - K D
S C D IG
I T A L L
O C K SE
T
FITTIN
G
TEMP
LATE
Distributed in Australia by
LOCK AND KEY a division on the
DAVCOR GROUP PTY
LTD ABN 95 003 562 598
This pro
duct has been manufactured in Taiwan
to Lock and Key Company specific
ations
This pro
duct is guaranteed to be free fro
m defects in materials and
workmanship for a period of one (1) year fro
m the date of original
purchase. This warranty is for replacement of pro
duct only and Lock
and Key Company does not accept responsibility for any direct or
consequential damage caused by this pro
duct or its use. This warranty does not cover damage
that results from faulty installa
tion or usage,
alteration or modification of the product or tarnishing of the finish
including colour change due to weather, salt or chemical. Should this
product not perform satisfactorily in its intended application, return it
to place of purchase for replacement.
LOCK & KEY
Phone:
1300 652 692
Web:
www.locknkey.com.au
Web:
www. daveweb.com.au
Outline of
Gasket
Centre line of latch
Centre line of latch
24mm
Ø10mm HOLES x 7
( Match to length of LATCH )
Fold along the edge of the
door
60mm
Fold along the edge of the door
( Match to length of LATCH )
60mm
41mm
17.5mm
Ø10mm HOLE
100mm Deep
Ø10mm HOLE
100mm Deep
100mm Deep
Ø10mm HOLE
Ø10mm HOLE
100mm Deep
130mm
85mm
30mm
13mm
13mm
Ø15mm HOLES x 4
1)
Check the handing of the door.
As shown in
fig 1
, the door’s
handing is dependant upon
which side the lock assembly is
mounted. When viewed from the
outside if the lock is on the right
it’s right-handed and if it’s on the
left it’s left-handed.
2)
Apply the Template and drill
the holes for the lock assembly.
(See fig 2)
Select the desired position of the lock on the door. It is recommended that the
centre line of the latch is at least 1000mm (±100mm) off the floor. This lock is supplied with a
60mm latch, however, if a 70mm latch is required, it is sold as a spare part.
• Fold the template along the dotted line
for the 60mm backset and tape to the door
at the required height.
• Mark and drill the seven 10mm holes as
shown on the template. Two are on the
door edge 100mm deep, and five are on
the door face and go through the door.
• Measure the thickness of the door and
mark the central point along the centre line
of the latch. Use the 25mm spade bit and
drill a 85mm deep hole for the latch.
•
It is very important that all the holes are
positioned with a good degree of accuracy
and are drilled straight and true.
• Remove the template and insert the
latch into the latch hole.
• Hold the latch in the position that it
would be when fitted.
• Use the face plate of the latch to mark out the rebate that
needs to be cut out and the remove the latch.
• As shown in
fig 3
, use the chisel to cut a 3mm rebate so that
the face plate sits flush with the edge of the door.
• Fit the latch assembly with two of the wood screws and
position the tailbar as shown in
fig 4.
Ensure that the bevelled
edge of the latchbolt faces the door frame so the door can
shut.
fig 3
fig 4
Instructions continued overleaf.
RIGHT HAND OPEN OUT
LEFT HAND OPEN OUT
OUTSIDE
LEFT HAND OPEN IN
RIGHT HAND OPEN IN
OUTSIDE
fig 1
