background image

Page 1 of 5

Access Control and Telephone Entry

1. GENERAL DESCRIPTION

A key component of a physical security electronic access control 
system, a mobile-ready reader combining BLE and contactless 
smart card technologies is based on RFID technology.

In operation it is capable of reading data stored on a contactless 
smartcard credential via high frequency—or reading data from 
mobile credential stored in a smartphone’s wallet app via BLE 
technology—and without physical contact, and then passing 
the data obtained to the physical access control system.

Access control systems typically manage and record the movement 
of individuals through a protected area, such as a locked door. 

CV-7600 Series-BLE 

Bluetooth Card Reader

INSTALLATION INSTRUCTIONS

2-  #6 x 1" Self-Tapping Screws
2-  6-32 x 1" Pan Head Phillips Screws
1-  Single Gang Mounting Plate

THIS PACKAGE INCLUDES:  

3. SPECIFICATIONS 

(WITH CARD READER DRAWING)

Input Voltage 

8 to 14V AC/DC

Current Draw

40 mA typical @ 12VDC 195 mA peak

Frequency

13.56 MHz (contactless smartcard) 2.4 GHz (BLE)

Cabling

24 AWG minimum, multi-conductor stranded 

with foil shield

Interface

Wiegand (26-bit formats), ABA Track II 

magnetic strike (clock & data) or OSDP

Operating  
Temperature

-40°F to 149°F (-40°C to 65°C)

LED Control

Blue, Red, Green, Amber and Off

Read Range

Physical:

   Up to 1.5" (38mm)

Mobile:

CV-7600: Up to 1 ft (30 cm) 
CV-7615: Up to 15 ft (4.6 m)

Audio Tone

Beeper included standard

Protection

IP67

Dimensions

Mullion:

 1 3/4"W x 11/16"H x 1 13/16"D 

(44mm x 119mm x 30mm)

Switch Plate: 

 3"W x 5 1/8"H x 1 3/16"D 

(76mm x 130mm x 30mm)

Notes:

1. Optimized for use with devices supporting BLE version 4.2.
2. Carrying the ETL Label and tested by Intertek, conforms to
     UL Standard 294.
3. Self evaluated.
4. Linear power supplies are recommended for best operation.
5. Using CV-MCS Clamshell Contactless Smartcard with 12 VDC at 

    the reader (other credentials may be less). Read ranges subject  
    to the smartphone used, the manner in which used, as well as  
    the installation and it's environment.

6. Ex. Belden 9535 or similar, supporting the five conductors 

    comprising the physical layer of the Wiegand interface (power,  
    ground, data 0, data 1, and/or beeper and LED). Alternatively,  
    Belden 9539 or similar, for all reader functions. Contact your  
    access control system manufacturer for specific requirements.

7. CSN = Card Serial Number

1-  6-32 x 1/4" Pan Head Phillips Screw
1-  6-32 x 1/4" Tamper-Resistant Button Head Hex Drive Screw

2. CONEKT WALLET APP

Instructions: 
1) Using the target smartphone, download and install the 
Conekt Wallet App. The App can be found on the Apple Store or 
Google Play Store or by the following link: 

http://onelink.to/sb6srb

2) Once installed, launch the Conekt Wallet App, then select the 
"+" button to load a new Conekt Mobile Access Credential. 

3) When prompted, enter the 16- character Conekt Registration 
Key. This will download and activate the Conekt Mobile 
Credential. The Conekt Registration Key may be manually 
entered or, using the associated QR code, scanned with the 
smartphone's camera.

4) The Conekt Mobile Access Credential will now appear in the 
Conekt Wallet App, ready to use.  

Reviews: