background image

MP3 CD Player/Receiver 

Model: 

CQ-CP137U

 

Operating Instructions 

TEXT

¡

  Please read these instructions (including “Limited Warranty” and “Customer Services Directory”) carefully 

before using this product and keep this manual for future reference.

Safety Information 

 Notes on Discs

 Specifi cations

Accessories 

Before Reading These Instructions

 Read the operating instructions for the unit and all other 

components of your car audio system carefully before 

using the system. They contain instructions about how to 

use the system in a safe and effective manner. Panasonic 

assumes no responsibility for any problems resulting 

from failure to observe the instructions given in this 

manual. 

 This manual uses pictographs to show you how to use 

the product safely and to alert you to potential dangers 

resulting from improper connections and operations. The 

meanings of the pictographs are explained below. It is 

important that you fully understand the meanings of the 

pictographs in order to use this manual and the system 

properly. 

This pictograph intends to alert you to the 

presence of important operating instructions 

and installation instructions. Failure to heed 

the instructions may result in severe injury or 

death. 

This pictograph intends to alert you to the pres-

ence of important operating instructions and in-

stallation instructions. Failure to heed the instruc-

tions may result in injury or material damage. 

Warning 

Caution 

 Warning 

Observe the following warnings when using this 

unit. 

 The driver should neither watch the display nor operate the 

system while driving. 

  Watching the display or operating the system will distract the 

driver from looking ahead of the vehicle and can cause accidents. 

  Always stop the vehicle in a safe location and use the parking brake 

before watching the display or operating the system. 

 Use the proper power supply. 

  This product is designed for operation with a negative grounded 12 

V DC battery system. Never operate this product with other battery 

systems, especially a 24 V DC battery system. 

 Keep batteries and insulation fi lm out of reach of infants. 

  Batteries and insulation fi lm can be ingested, so keep them out of 

the reach of infants. If an infant ingests a battery or insulation fi lm, 

please seek immediate medical attention. 

 Protect the Deck Mechanism. 

  Do not insert any foreign objects into the slot of this unit. 

 Do not disassemble or modify the unit. 

  Do not disassemble, modify the unit or attempt to repair the 

product yourself. If the product needs to be repaired, consult your 

dealer or an authorized Panasonic Servicenter. 

 Do not use the unit when it is out of order. 

  If the unit is out of order (no power, no sound) or in an abnormal 

state (has foreign objects in it, is exposed to water, is smoking, 

or smells), turn it off immediately and consult your dealer or an 

authorized Panasonic Servicenter. 

 The remote control unit should not lie about in the car. 

  If the remote control unit lies about, it could fall on the fl oor while 

driving, get wedged under the brake pedal, and lead to a traffi c 

accident. 

 Refer fuse replacement to qualifi ed service personnel. 

  When the fuse blows out, eliminate the cause and have it replaced 

with the fuse prescribed for this unit by a qualifi ed service engi-

neer. Incorrect replacement of the fuse may lead to smoke, fi re, 

and damage to the product. 

Observe the following warnings when installing. 

 Disconnect the lead from the negative (–) battery terminal 

before installation. 

  Wiring and installation with the negative (–) battery terminal con-

nected may cause electrical shock and injury due to a short circuit. 

Some cars equipped with the electrical safety system have specifi c 

procedures of battery terminal disconnection. 

  FAILURE TO FOLLOW THE PROCEDURE MAY LEAD TO THE 

UNINTENDED ACTIVATION OF THE ELECTRICAL SAFETY SYS-

TEM RESULTING IN DAMAGE TO THE VEHICLE AND PERSONAL 

INJURY OR DEATH. 

 Never use safety-related components for installation, grounding, 

and other such functions. 

  Do not use safety-related vehicle components (fuel tank, brake, 

suspension, steering wheel, pedals, airbag, etc.) for wiring or fi xing 

the product or its accessories. 

 Installing the product on the air bag cover or in a location where 

it interferes with airbag operation is prohibited. 

 Check for piping, gasoline tank, electric wiring, and other items 

before installing the product. 

  If you need to open a hole in the vehicle chassis to attach or wire 

the product, fi rst check where the wire harness, gasoline tank, and 

electric wiring are located. Then open the hole from outside if pos-

sible. 

 Never install the product in a location where it interferes with 

your fi eld of vision. 

 Never have the power cord branched to supply other equipment 

with power. 

 After installation and wiring, you should check the normal 

operation of other electrical equipment. 

  The continuation of their using in abnormal conditions may cause 

fi re, electrical shock or a traffi c accident. 

 In the case of installation to an airbag-equipping car, confi rm 

warnings and cautions of the vehicle manufacturer before instal-

lation. 

 Make sure the leads do not interfere with driving or getting in 

and out of the vehicle. 

 Insulate all exposed wires to prevent short circuiting. 

 Keep accessories out of reach of infants.

  Accessories can be ingested, so keep them out of the reach of 

infants. If an infant ingests accessories, please seek immediate 

medical attention.

Mounting Collar 

Trim Plate 

Power Connector 

Remote Control Unit 

(a battery included) 

Q’ty: 1

Q’ty: 1

Q’ty: 1

Q’ty: 1

(FX0214C384ZB) 

(YFC054C079YA) 

(YAJ024C142CA) 

(YFX994C186CA) 

XXXXXXXXXXXXXXX

OO-OOOOO

XXXXXXXXXXXXXXX

OO-OOOOO

Lock Cancel Plate  Mounting Bolt (5 mm ø) 

Rubber Bushing 

Operating Instructions  Installation Instructions 

Installation kit  

Instruction kit

Q’ty: 1 set 

Q’ty: 3

Q’ty: 1

(ZZBISCP137U)

(English: YFM264C242ZA)

(Français: YFM264C243ZA)

(Español: YFM264C244ZA)

(YFM294C177ZA)

Notes

¡

 The number in parentheses underneath each accessory part name is the part number for maintenance and ser-

vice. 

¡

 Accessories and their part numbers are subject to modifi cation without prior notice due to improvements. 

¡

 Mounting Collar and Trim Plate are mounted on the main unit at shipment. 

 Caution 

Observe the following cautions when using this 

unit. 

 Keep the sound volume at an appropriate level. 

  Keep the volume level low enough to be aware of road and traffi c 

conditions while driving. 

 This unit is designed for use exclusively in automobiles. 

 Do not operate the unit for a prolonged period with the engine 

turned off. 

  Operating the audio system for a long period of time with the 

engine turned off will drain the battery. 

 Do not expose the unit to direct sunlight or excessive heat. 

  Otherwise these will raise the interior temperature of the unit, 

and it may lead to smoke, fi re, or other damage to the unit. 

 Do not use the product where it is exposed to water, moisture, 

or dust. 

  Exposure of the unit to water, moisture, or dust may lead to 

smoke, fi re, or other damage to the unit. Make especially sure 

that the unit does not get wet in car washes or on rainy days. 

 Set the volume level to low enough before the AUX connection 

is completed. 

  Failure to observe this, the loud noise may come out and dam-

age your speakers and your hearing. Direct connection of the 

speaker/headphone output of an external device without any 

attenuator may distort sound or damage the connected external 

device. 

Observe the following cautions when installing. 

 Refer wiring and installation to qualifi ed service personnel. 

  Installation of this unit requires special skills and experience. For 

maximum safety, have it installed by your dealer. Panasonic is 

not liable for any problems resulting from your own installation 

of the unit. 

 Follow the instructions to install and wire the product. 

  Not following the instructions to properly install and wire the 

product could cause an accident or fi re. 

 Take care not to damage the leads. 

  When wiring, take care not to damage the leads. Prevent them 

from getting caught in the vehicle chassis, screws, and moving 

parts such as seat rails. Do not scratch, pull, bend or twist the 

leads. Do not run them near heat sources or place heavy objects 

on them. If leads must be run over sharp metal edges, protect 

the leads by winding them with vinyl tape or similar protection. 

 Use the designated parts and tools for installation. 

  Use the supplied or designated parts and appropriate tools to 

install the product. The use of parts other than those supplied 

or designated may result in internal damage to the unit. Faulty 

installation may lead to an accident, a malfunction or fi re. 

 Do not block the air vent or the cooling plate of the unit. 

  Blocking these parts will cause the interior of the unit to overheat 

and will result in fi re or other damage.

 Do not install the product where it is exposed to strong vibra-

tions or is unstable. 

  Avoid slanted or strongly curved surfaces for installation. If the 

installation is not stable, the unit may fall down while driving and 

this can lead to an accident or injury. 

 Installation Angle 

  The product should be installed in a horizontal position with the 

front end up at a convenient angle, but not more than 30°. 

  The user should bear in mind that in some areas there may 

be restrictions on how and where this unit must be installed. 

Consult your dealer for further details. 

 Wear gloves for safety. Make sure that wiring is completed 

before installation. 

 To prevent damage to the unit, do not connect the power con-

nector until the whole wiring is completed. 

 Do not connect more than one speaker to one set of speaker 

leads. (except for connecting to a tweeter) 

Observe the following cautions when handling 

the battery for the remote control unit. 

¡

 Use only specifi ed battery (CR2025). 

¡

 Match the polarity of the battery with the (+) and (−) marks in 

the battery case. 

¡

 Replace a dead battery as soon as possible. 

¡

 Remove the battery from the remote control unit when not using 

it for an extended period of time. 

¡

 Insulate the battery (by placing them in a plastic bag or covering 

them with vinyl tape) before disposal or storage. 

¡

 Dispose of the battery according to the local regulations. 

¡

 Do not disassemble, recharge, heat or short the battery. Do not 

throw a battery into a fi re or water. 

In case of battery leakage 

¡

 Thoroughly wipe the battery liquid off the battery case and insert 

new battery. 

¡

 If any part of your body or clothing comes into contact with bat-

tery liquid, wash it with plenty of water. 

¡

 If battery liquid comes into contact with your eyes, wash them 

with plenty of water and get immediate medical attention. 

 Caution 

THIS PRODUCT IS A CLASS 

I

 LASER PRODUCT. 

USE OF CONTROLS OR ADJUSTMENTS OR PERFOR-

MANCE OF PROCEDURES OTHER THAN THOSE SPECI-

FIED HEREIN MAY RESULT IN HAZARDOUS RADIATION 

EXPOSURE. 

DO NOT OPEN COVERS AND DO NOT REPAIR BY YOUR-

SELF. REFER SERVICING TO QUALIFIED PERSONNEL. 

 How to hold the disc

¡

 Do not touch the underside of the disc.

¡

 Do not scratch the disc.

¡

 Do not bend disc.

¡

 When not in use, keep disc in the case.

Printed side

Unusable discs

Do not use discs that fi t any of the descriptions given 

below. Using these discs may damage the discs or cause 

the unit to malfunction.

¡

 Special discs in a shape which is not round

 

¡

 Partly or wholly transparent disc

 

 Wholly transparent disc*

 

 Partly transparent disc

*Wholly semi-transparent disc may not be played back.

¡

 Discs with adhered labels, etc. on them

 

 Disc with adhered stickers 

or tape

 

 Labels created by a printer

 

 Protective fi lms or sheets

 

 Disc accessories (stabiliz-

ers, etc.)

¡

 Damaged or deformed discs

 

 Shoddily made discs

 

 Discs with cracks, scratches 

or parts missing

 Discs with burrs

Please remove the burrs before use.

Disc insert

The surfaces of new discs tend to be slippery. Therefore, 

when using such a disc for the fi rst time, it may not load 

satisfactorily even when it has been inserted into the unit. At 

a time like this, insert the disc into the unit as far as it will go 

until it is loaded properly.

¡

 When inserting a disc into or ejecting and removing it 

from the unit, insert it straight in or eject and remove 

it straight out in parallel with the unit. Otherwise, the 

disc may be scratched or marked in the process.

¡

 When inserting a disc, do not put one disc on another. 

Failure to observe this may cause the discs to be 

jammed.

Do not leave discs in the following places:

¡

 Direct  sunlight

¡

 Near  heaters

¡

 Dirty, dusty and damp areas

¡

 On seats and dashboards

Disc cleaning

Use a dry, soft cloth to wipe from the center outward.

Do not attach any seals or labels to your discs.

Do not write on the disc label in a heavy pen or ballpoint 

pen.

 

 <Correct>

 

 <Wrong>

Notes on CD-Rs/RWs

¡

 You may have trouble playing back some CD-R/RW discs 

recorded on CD recorders (CD-R/RW drives), either due 

to their recording characteristics or dirt, fi ngerprints, 

scratches, etc. on the disc surface.

¡

 CD-R/RW discs are less resistant to high temperatures 

and high humidity than ordinary music CDs. Leaving 

them inside a vehicle for extended periods may damage 

and make playback impossible.

¡

 The unit may not successfully playback a CD-R/RW that 

was made by the combination of writing software, a CD 

recorder (CD-R/RW drives) and a disc if they are incom-

patible with one another.

¡

 This player does not play CD-R/RW discs if the session is 

not closed.

¡

 Be sure to observe the handling instructions of CD-R/RW 

discs.

¡

 This player does not play CD-R/RW discs which contain 

other than CD-DA or MP3 data.

 Notes on MP3

MP3 (MPEG Audio Layer-3) is a format for compressed audio fi le. This format allows users to save all the fi les contained in 

approximately 10 pieces of existing CDs on one piece of CD-R/RW.

Note: Each of encoding software is not included with this unit.

*MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.

 Cautions as to compressed audio fi les

 Cautions as to the display of this unit

 Compression  formats

 Compression  method

 Bit  rate

 VBR

 Sampling  frequency

 MPEG 1 audio layer 3 (MP3)

 32 k – 320 kbps

 Yes

 32, 44.1, 48 kHz

 MPEG 2 audio layer 3 (MP3)

 8 k – 160 kbps

 Yes

 16, 22.05, 24 kHz

 MPEG 2.5  audio layer 3 (MP3)

 8 k – 160 kbps

 Yes

 8, 11.025, 12 kHz

¡

 High bit rate and high sampling frequency are recom-

mended for high quality sounds.

¡

 Selecting VBR (Variable Bit Rate) is not recommended 

because playing time is not displayed properly and sound 

may be skipped.

¡

 The playback sound quality differs depending on the 

encoding circumstances. For details, refer to the user 

manual of your own encoding software and writing soft-

ware.

¡

 Be sure to put an extension compatible with the format.

¡

 It is recommended to set the bit rate to “128 kbps or 

more” and “fi xed”.

  Recording MP3 Files on a CD-Media

Compressed audio fi le writing

¡

 Do not save an audio fi le (CD-DA fi le) and a com-

pressed audio fi le on the same disc. Failure to 

observe this may result in diffi culty in playing.

¡

 If compressed audio fi les formatted with two or more 

types are saved on the same disc, each format shall 

have a different folder.

¡

 Do not write fi les other than compressed audio fi les.

¡

 Playability may depend on the combination of writing 

software and disc writer to be used.

¡

 This unit does not support the play list function.

¡

 Write fi les in a disc-at-once manner unless otherwise 

needed.

¡

 You can shorten the duration between data read and 

playback by decreasing the quantity of fi les or folders, 

or the depth of the hierarchy.

Supported fi le systems

ISO 9660 Level 1/Level 2, Apple Extension to ISO 9660, 

Joliet, Romeo

Note: Apple HFS, UDF 1.50, Mix CD and CD Extra are 

not supported.

Maximum number of fi les/folders

¡

 Maximum depth of trees: 8 

¡

 Maximum number of fi les: 999 

¡

 Maximum number of fi les in one folder: 999 

¡

 Maximum number of folders: 

  256 (Root folder is included.) 

Notes

¡

 You can shorten the duration between data read and 

playback by decreasing the quantity of fi les or folders, 

or the depth of the hierarchy. 

¡

 This unit counts the number of folders irrespective of 

the presence or absence of an MP3 fi le. 

¡

 If the selected folder does not contain any MP3 fi les, 

the nearest MP3 fi les in the order of playback will be 

played. 

¡

 Playback order may be different from other MP3 play-

ers even if the same disc is used. 

¡

 “ROOT” appears when displaying the root folder name. 

Folder selection order/fi le playback order

Root Folder

(Root Directory)

Folder Selection

File Selection

Tree 1 

Tree 2

Tree 3

Tree 4

Tree 8

(Max.)

2

1

3

4

q

q

w

e

r

t

y

y

6

7

5

8

1

8

In the order

In the order

 Copyright

It is prohibited by copyright laws to copy, distribute and 

deliver copyrighted materials such as music without the 

approval of copyright holder except enjoying yourself 

personally.

No warranty

Above description complies with our investigations as of 

March 2011. It has no warranty for reproducibility and 

displayability of MP3.

 Display  Information

 

¡

 CD-TEXT

Disc title 

Track title

¡

 MP3

Folder name, 

File name

¡

 MP3 (ID3 tag)

Album name, 

Title name/artist name

Displayable characters

¡

 Displayable length of fi le name/folder name: within 64 

characters. (Unicoded fi le and folder names are reduced 

by half in the number of displayable characters.)

¡

 Name fi les and folders in accordance with the standard 

of each fi le system. Refer to the instructions of writing 

software for details.

¡

 ASCII character set and special characters in each lan-

guage can be displayed.

ASCII character set

A to Z, digits 0 to 9, and the following symbols:

 (space) ! ” # $ % & ’ ( )  * + , - . / : ; < = > ? @ [ \ ] ˆ _ ` { | 

} ~

Notes:

¡

 Characters may be garbled depending on encoding soft-

ware to be used.

¡

 Undisplayable characters and symbols will be converted 

into an asterisk ( ).

 Caution

 Never put an extension indicating compressed audio (such as “.mp3”) to fi les other than compressed audio fi les. 

This may not only produce noise from the speaker damage, but also damage your hearing.

 General

Power supply: 

12 V DC (11 V – 16 V) test voltage 

14.4 V, Negative ground

Current consumption: 

Less than 2.2 A (CD mode, 

0.5 W x 4 channels)

Maximum power output: 

50 W x 4 channels (at 1 kHz), Vol-

ume control maximum

Tone adjustment range

  Bass: 

± 12 dB (at 100 Hz)

  Treble: 

± 12 dB (at 10 kHz)

Speaker impedance: 

4 – 8 

Ω

Pre-amp output voltage: 

2.0 V (CD mode, 1 kHz, 0 dB)

Pre-amp output impedance: 200 

Ω

Dimensions (W x H x D): 

178 mm x 50 mm x 158 mm

  

{7

 x 1 15/16

 x 6 1/4

}

Weight: 

1.3 k

g

 {2 lbs. 14 oz}

Front AUX input 

  Input impedance: 

10 k

Ω

  Maximum input level: 

2.0 V

  Connector: 

3.5 mm ø Stereo mini pin

  Input sensitivity: 

200 mVrms

FM radio 

Frequency range: 

87.9 MHz – 107.9 MHz

Usable sensitivity: 

11.0 dBf (75 

Ω

)

50 dB quieting sensitivity:  15.2 dBf (75 

Ω

)

Frequency response: 

30 Hz – 15 kHz (±3 dB)

Alternate channel selectivity: 75 dB

Stereo separation: 

35 dB (at 1 kHz)

Image rejection ratio: 

55 dB

IF rejection ratio: 

100 dB

Signal/noise ratio: 

62 dB

AM radio 

Frequency range: 

530 kHz – 1 710 kHz

Usable sensitivity: 

27 dB/µV (22 µV, S/N 20 dB)

CD player

Sampling frequency: 

8 times oversampling

DA converter: 

1 bit DAC System

Pick-up type: 

Astigma 3-beam

Light source: 

Semiconductor laser

Wavelength: 

790 nm

Frequency response: 

20 Hz – 20 kHz (±1 dB)

Signal to noise ratio: 

96 dB

Total harmonic distortion:  0.01 % (1 kHz)

Wow and fl utter: 

Below measurable limits

Channel separation: 

75 dB

Above specifi cations comply with EIA standards.

Notes:

¡

 Specifi cations and design are subject to modifi cation 

without notice due to improvements.

¡

 Some fi gures and illustrations in this manual may be 

different from your product.

Panasonic welcomes you to our constantly growing family of electronic products owners.

We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully se-

lected components, and assembled by people who are proud of the reputation their work has built for our company. We know 

this product will bring you many hours of enjoyment, and after you discover the quality, value and reliability we have built into 

it, you too will be proud to be a member of our family.

YFM264C242ZA     PTW0311-0       Printed in Taiwan

 The following applies only in the U.S.A.

 Part 15 of the FCC Rules
FCC Warning:
Any unauthorized changes or modifi cations to this 

equipment would void the user's authority to operate 

this device.

 Power  Output: 

16 W RMS x 4 Channels at 4  

Ω

 and 

 1% 

THD+N

Signal to Noise Ratio: 

85 dBA (reference: 1 W into 4 

Ω

 Customer Services Directory

Customer Services Directory

(United States and Puerto Rico)

Obtain Product Information and Operating Assistance; locate your nearest 

Dealer or Servicenter; purchase Parts and Accessories; or make Customer 

Service and Literature requests by visiting our Web Site at:

http://www.panasonic.com/support

or, contact us via the web at:

http://www.panasonic.com/contactinfo

You may also contact us directly at:

1-800-211-PANA (7262),

Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.

For hearing or speech impaired TTY users, TTY : 1-877-833-8855

Accessory Purchases:

(United States and Puerto Rico)

Purchase Parts, Accessories and Instruction Books online for all Pana-

sonic Products by visiting our Web Site at:

http://www.pasc.panasonic.com

or, send your request by E-mail to:

[email protected]

You may also contact us directly at:

1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday-Friday 9 

am to 8 pm, EST.)

Panasonic Services Company

20421 84th Avenue South, Kent, WA 98032

(We accept Visa, MasterCard, Discover Card, American Express, and 

Personal Checks)

For hearing or speech impaired TTY users, TTY : 1-866-605-1277

 Limited  Warranty

 Limited  Warranty

(For USA and Puerto Rico Only)

PANASONIC AUTOMOTIVE SYSTEMS COMPANY OF AMERICA, 

DIVISION OF PANASONIC CORPORATION OF NORTH AMERICA 

776 HIGHWAY 74 SOUTH, PEACHTREE CITY, GA 30269

PANASONIC AUTO PRODUCTS 

LIMITED WARRANTY

LIMITED WARRANTY COVERAGE

If your product does not work properly because of defects in materials 

and workmanship.

Panasonic Automotive Systems Company of America (referred to as “the 

warrantor”) will, for the length of the period indicated in the chart below, 

which starts with the date of original purchase (“warranty period”), at its 

option either (a) repair your product with new or refurbished parts, or 

(b) replace it with a new or refurbished product. The decision to repair or 

replace will be made by the warrantor.

 Categories

 Parts

 Labor

 Audio Components (except items listed below)

 One (1) Year

 One (1) Year

 Speakers

Defective Car Audio Speakers under warranty 

must be exchanged at the place of purchase. 

Contact your Dealer for details.

 One (1) Year

 Not  Applicable

 Accessories (in exchange for defective items)

 Ninety (90) Days  Not  Applicable

During the “Labor” warranty period, there will be no charge for labor. 

During the “Parts” warranty period, there will be no charge for parts. You 

must carry-in or mail-in your product prepaid during the warranty period. 

If non-rechargeable batteries are included, they are not warranted. This 

warranty only applies to products purchased and serviced in the United 

States or Puerto Rico. This warranty is extended only to the original pur-

chaser of a new product which was not sold “as is”. A purchase receipt or 

other proof of the original purchase date is required for warranty service.

CARRY-IN OR MAIL-IN SERVICE

For Carry-In or Mail-In Service in the United States and Puerto Rico, call 

1-800-211-PANA (7262) or visit

Panasonic Web Site: http://www.panasonic.com

LIMITED WARRANTY LIMITS AND EXCLUSIONS

This warranty ONLY COVERS failures due to defects in materials and 

workmanship, and DOES NOT COVER normal wear and tear or cosmetic 

damage. The warranty ALSO DOES NOT COVER damages which occurred 

during shipment, failures which are caused by products not supplied by 

the warrantor, failures which result from accident, misuse, abuse, neglect, 

bug infestation, mishandling, misapplication, alteration, faulty installation, 

set-up adjustment, maladjustment of consumer control, improper main-

tenance, improper antenna, inadequate signal reception or pickup, power 

line surge, improper voltage supply, lightning, modifi cation, commercial 

use (such as use in hotels, offi ces, restaurants, or other business uses) or 

rental use of the product, or service by anyone other than the technician 

from Factory Servicenter or other authorized service centers, or damage 

that is attributable to acts of God. 

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER 

“LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE 

FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM 

THE USE OF THIS PRODUCT,  OR ARISING OUT OF ANY BREACH OF 

THIS WARRANTY. (As examples, this excludes damages for lost time, 

cost of having someone remove or re-install an installed unit if applicable, 

travel to and from the sevicer, and loss of media, data or other memory 

contents. The items listed are not exclusive, but are for illustration only.) 

ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WAR-

RANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE 

LIMITED WARRANTY.

Some states do not allow the exclusion or limitation of incidental or 

consequential damages, or limitations on how long an implied warranty 

lasts, so the exclusions may not apply to you.

This warranty gives you specifi c legal rights and you may also have 

other rights which vary from state to state. If a problem with this product 

develops during or after the warranty period, you may contact your dealer 

or Servicenter. If the problem is not handled to your satisfaction, then 

write to warrantor’s Consumer Affairs Department at the addresses of the 

warrantor.

PARTS AND SERVICE WHICH ARE NOT COVERED BY THIS LIMITED 

WARRANTY ARE YOUR RESPONSIBILITY.

Customer’s Record

Model

No.

Serial

No.

Dealer’s

No.

Code

No.

Dealer’s

Address

Date of 

Purchase

Maintenance/Fuse 

Cleaning the Unit 

Your product is designed and manufactured to ensure the 

minimum of maintenance. Use a dry, soft cloth for routine 

exterior cleaning. Never use benzine, thinner, or other 

solvents. 

Fuse 

If the fuse blows out, consult your dealer or an authorized 

Panasonic Servicenter. 

 Warning 

Use fuses of the same specifi ed rating (15 A). Using 

substitutes or fuses with higher ratings, or connecting 

the unit directly without a fuse could cause fi re or dam-

age to the unit. If the replaced fuse fails, consult your 

dealer or an authorized Panasonic Servicenter.  

English

Reviews: