![background image](http://html1.mh-extra.com/html/callaway-golf/upro/upro_quick-start-manual_3466808001.webp)
Quick Start Guide
1)
Remove the battery cover on the
uPro.
While pressing
the upper center portion of
the battery cover firmly, slide
the battery cover downward to remove.
2)
Insert the Li-Ion rechargeable battery into the battery
compartment. Angle the battery such that the bottom
edge with the three contacts makes contact with the
connector on the
uPro
first and then push the top side
of the battery into place. The text on the battery should
be facing up.
Handle your Li-Ion battery with care.
See battery warning sheet for additional information.
3)
Replace the battery cover.
4)
Insert the mini-USB connector of the included USB cable
into the USB connector on the bottom of the
uPro.
5)
Connect the other end of the USB cable to the included
wall adapter.
6)
Plug the wall charger into an AC wall outlet. The
uPro’s
red LED will be lit while charging. If the red LED is not lit,
check your connections, and if the problem persists, please
reference the full User Manual at
www.callawaygolf.com/
uprogps
. The red LED will begin to flash when charging
is completed. Charging the battery completely takes
approximately 3 hours.
Charging your Callaway uPro
®
Powering On
Once you have charged your
uPro
, disconnect it from
the USB cable and power it on by pressing
and holding
the Power/Menu button for at least three seconds (until
the startup screen appears). The startup screen will show
four open dots which will fill-in as the startup progresses,
and then the Main Menu will be displayed.
Registering your Callaway uPro®
In order to use your
uPro
on the course, you will need
to register your
uPro
and create a user account online at
our website.
1) Power on the Callaway uPro –
Press and hold the power
button for 3 seconds to power on the
uPro.
Once the startup
screen appears, the
uPro
is powered on.
2) Connect to a computer –
Once the Main Menu is dis-
played on the
uPro
, connect the USB cable to the
uPro.
Insert
the mini-USB connector (smaller connector on the cable)
Buttons
Right LCD
Select
Directional
Arrows
Left LCD
Select
USB
Select/Enter
Headphone
Voice
Recognition
LED Light
Power/Menu
ProMode
Button
Microphone
Battery Cover
Press Down
& Slide Open
USB Port
Headphone Jack