8/18/2021
LMU-2600 Hardware & Installation Guide - PULS Wiki
https://puls.calamp.com/wiki/LMU-2600_Hardware_%26_Installation_Guide
1/44
LMU-2600 Hardware & Installation Guide
LMU-2600™
Hardware and Installation Guide
IMPORTANT: DO NOT INSTALL OR USE THE SOFTWARE OR DOCUMENTATION UNTIL YOU
HAVE READ AND AGREED TO THE LICENSE AGREEMENT AND REVIEWED THE LIMITED
WARRANTY AND REGULATORY INFORMATION.
1 Introduction
Welcome to the LMU-2600™ Hardware and Installation Guide. This manual is intended to give you information on
the basic setup and installation of the CalAmp LMU-2600™ product(s) including hardware descriptions,
environmental specifications, wireless network overviews and device installation.
1.1 About This Manual
The LMU-2600™ is one of the most flexible economy mobile tracking hardware products available. In order
to accurately describe the functionality of these units we have broken this manual into the following sections:
System Overview
– A basic description of a CalAmp LMU-2600™ based tracking system. This
includes a description of roles and responsibilities of each of the CalAmp components as well as a
brief overview of the wireless data technologies used by the LMU-2600™.
Hardware Overview
– Describes the physical characteristics and interfaces of the LMU-2600™.
Installation and Verification
– Provides guidance for the installation of the LMU-2600™ in a
vehicle and instructions on how to verify the installation is performing adequately.
1.2 About The Reader
In order to limit the size and scope of this manual, the following assumptions have been made about the
reader.
You are familiar with GPS concepts and terminology
