background image

 
 
 
 
 
 
 

CW-4000 

PROFESIONAL DIGITAL TELEVISION EQUIPMENT 

 
 
 

 

 

 

OPERATING INSTRUCTIONS 

 
 
 
 

Dear User!

 

  Digital television technology permits implementing 

numerous features, which could not or hardly could 

be achieved in analogue technology. 
  The CW-4881 Transport Stream Generator 

&

 

Inserter

 

has been designed for creative technicians, 

who want to realize their ideas also in television 

technique. 
 The 

device 

comprises two flash memories. One of 

them is always in operation state, and the other can be 
programmed from the user’s PC. 

1. MECHANICAL CONSTRUCTION 

The CW-4881 Transport Stream Generator 

&

 Inserter

 

is built in standard 19" × 1 HU instrument frame. It is 
delivered along with following accessories: 

1.  Power cord  

 

 

1 ea. 

2.  Spare fuse T 1.25 A 
 

(placed in the fuse holder mounting) 

1 ea. 

3.   Crossover cable with RJ45 connectors  1 ea. 

The power consumption of the device is very low 
therefore no cooling or ventilation is needed, however 
do not use it covered, blocking the natural airflow. 

2. ELECTRICAL CONSTRUCTION 

A CW-4881 Transport Stream Generator 

&

 Inserter

 

is 

a device of simple structure but very wide scope of 
application. 

 

The device is equipped with an own switching 

mode power supply. The supply voltage of the 
interface circuitries is 3.3 V; the signal processing 
circuitries are supplied with a voltage as low as +1.2 
V. The power consumption is low; the device is 
suitable for continuous service. 

  Programming of the device is made through 
CableWorld’s CW-Net system; the steps of putting in 
operation the system is described in the 
Using_CW_Net.pdf file at www.cableworld.eu. 
  All items of CableWorld software are available for 
free download and use at www.cableworld.eu. The 
software user manuals are available in the Help 
menus and also on the web site, separately in pdf 
format. The CW-4881 Transport Stream Generator 

&

 

Inserter can operate with all CableWorld software. 

 

All CW-Net controlled CableWorld devices are 

shipped with the IP address set to 10.123.13.101. 
Prior to using them in network, the IP address must 
be changed to avoid conflict between the IP 
addresses. 

 

For changing the IP address download, install and 

use the SW-4800 software. All knowledge necessary 
for this is included in the Help file of the software. 

 

KÁBEL-TV RENDSZEREKET GYÁRTÓ ÉS FORGALMAZÓ MAGYAR - AMERIKAI KFT.

A HUNGARIAN - AMERICAN LTD. COMPANY FOR MANUFACTURE AND SALES OF CABLE TV EQUIPMENT

 

CW-4881 

TS GENERATOR & INSERTER

 

07/07 

Reviews: