CONGRATULATIONS YOUR ELEPHANTOM AS ARRIVED!
All the parts on your ELEPHANTOM are SNAP-‐ON, so you can assemble and disassemble fast and
easy. This way you can store your ELEPHANTOM in a tight storage space like a backpacks pocket,
and have it ready fast when you need it.
The first times you SNAP-‐ON/SNAP-‐OFF the sections, the parts may offer more resistance to the
snap assembly process, but they will ease in with time and usage.
1.
STEP: IDENTIFY ALL THE PARTS of your ELEPHANTOM
FACE
TAIL SPINE SKIN 2x TUSKS
2. STEP: RIGHT SIDE OF PARTS
Printed parts have a SMOOTH side and a TEXTURED side.
The FACE section and the TAIL section have to be assembled with the SMOOTH SIDES FACING
INSIDE (facing each other). So TEXTURED sides of these parts face OUTSIDE. If you don’t follow
this rule, ELEPHANTOM will not embrace your drone in the right away.
3. STEP: FACE -‐ SPINE – SKIN -‐ TAIL ASSEMBLY
Grab the SPINE part horizontally with the
backbone up, and press the snap-‐on zones with
your index and thumb and force it thru the top
opening on the SMOOTH side of the FACE part.
INSERT THE SKIN section OVER THE SPINE.
Same as what you did with the FACE section, now
SNAP-‐ON the other end of the SPINE with the
SMOOTH side TOP opening on the TAIL section.
ALWAYS use these inside pressure points, with
your index and thumb, to SNAP-‐ON/SNAP-‐OFF the
SPINE section.
