background image

Buc

Buc

Buc

Buc

BuckEy

kEy

kEy

kEy

kEye Cam

e Cam

e Cam

e Cam

e Cam

TM

TM

TM

TM

TM

Wireless Hunting

Wireless Hunting

Wireless Hunting

Wireless Hunting

Wireless Hunting

Camer

Camer

Camer

Camer

Camera Sy

a Sy

a Sy

a Sy

a Syssssstttttem

em

em

em

em

Model  RC-5000

Owner

Owner

Owner

Owner

Owner’’’’’s Manual

s Manual

s Manual

s Manual

s Manual

Version 3.20

Version 3.20

Version 3.20

Version 3.20

Version 3.20

FOR REPAIR, CONTACT US AT:

ATSI

8157 US Route 50  •  Athens, OH 45701

(866) 325-8172  •  (740) 592-2874

Fax (740) 594-2875

[email protected]

www.buckeyecam.com

WARRANTY REGISTRATION

ATSI warrants Products (BuckEye Cam

TM

) sold by it and guarantees to correct, by repair or replacement at our

option, any defects of material and workmanship which develop under normal and proper use within six (6)
months from the date of the original purchase when inspection proves the fault to be of manufacturing.
Circuit board components only receive a twelve (12) monthy warranty.  All such Products must be returned to
our service center, transportation charges prepaid.  This warranty does not apply to any of our Products which
have been repaired or altered by aunathorized persons or service centers in any way so as, in our judgement,
to injure their stability or reliablility, or which have been subject to misuse, negligence, or accident or which
have had their serial number altered, effaced or removed.

We will not assume any expense or liability for repairs made by other parties without our written consent.  ATSI is
not responsible for damage to any associated equipment or apparatus, nor shall we be held liable for loss of
profit or other special damages.  There is no other guarantee or warranty except as herein stated.

The Buyer, his employees, or others assumes all risks and liabilities for the operation, the use and the misuse of
the product described herein and agree to defend and to save the seller harmless from any and all claims
arising from any cause whatsoever, including seller’s negligence for personal injury incurred in connection with
the use of the said product.

ATSI reserves the right to discontinue models at any time or change specifications, price or design without
notice and without incurring any obligation.

The express warranties are in lieu of all other warranties, guarantees, promises, affirmations, or representations,
express or implied which would be deemed applicable to the goods sold hereunder.  No express warranties
and no implied warranties, whether of merchantability, fitness for any particular use or purpose, against
infringement, or otherwise (except as to title) other than those expressly set forth herein, shall apply.

Summary of Contents for RC-5000









































Reviews: