INTRODUCTION
INTRODUCTION
This Shop Manual covers the following BRP made
2013 Can-Am side by side vehicles.
MODEL
ENGINE
TYPE
MODEL NUMBER
Commander
800R
810
6CDA, 6CDB, 6CDC, 6TDA,
6DDA, 6DDB, 6DDC
Commander
1000
1010
6ADA, 6ADB, 6PDA, 6BDA,
6BDB, 6BDD, 6BDE, 6BDF,
6BDG, 6BDH, 6EDA,
6EDB, 6EDC, 6EDD, 6GDA,
6GDB, 6GDC, 6GDD
The information and component/system descrip-
tions contained in this manual are correct at time
of writing. BRP however, maintains a policy of
continuous improvement of its products without
imposing upon itself any obligation to install them
on products previously manufactured.
Due to late changes, there may be some differ-
ences between the manufactured product and the
description and/or specifications in this document.
BRP reserves the right at any time to discontinue
or change specifications, designs, features, mod-
els or equipment without incurring obligation.
VEHICLE INFORMATION
VEHICLE IDENTIFICATION
NUMBER (VIN)
tmr2011-002-001_a
TYPICAL
1. VIN (Vehicle Identification Number) location
The VIN (Vehicle Identification Number) decal is lo-
cated under the glove box on the passenger side.
VIN Decal Description
tmr2011-002-005_a
TYPICAL — VEHICLE IDENTIFICATION NUMBER LABEL
1. VIN (Vehicle Identification Number)
2. Model number
3. Manufacturing date
ENGINE IDENTIFICATION
NUMBER (EIN)
tmr2011-002-002_a
TYPICAL - RH SIDE OF ENGINE
1. Engine Identification Number (EIN)
LIFTING AND SUPPORTING THE
VEHICLE
Front of Vehicle
1. Place vehicle on a flat non slippery ground.
2. Ensure vehicle shift lever is set to PARK.
3. Install an hydraulic jack under front skid plate.
4. Lift front of vehicle and install a jack stand on
each side under frame section in front of the lip
for center skid plate.
X
tmr2013-002
www.MilitaryAtv.com
