![background image](http://html.mh-extra.com/html/broan/best-iser222-series/best-iser222-series_specification-sheet_2816754001.webp)
SPECIFICATION SHEET
BEST BY BROAN
P.O. BOX 140 HARTFORD, WISCONSIN 53027
REFERENCE
QTY.
REMARKS
Project
Location
Architect
Engineer
Contractor
Submitted by
Date
ISER222 SERIES
RANGE HOODS
Mount range hood so bottom of hood is
24” minimum above cooking surface.
70D
99042854E
Tubular, wrap-around utensil rail serves as both a
stunning accent and a practical addition to this
elegant angular design.
FEATURES
•
Italian design
•
Island mount
•
Finishes: 304 Stainless Steel #4 Brushed, White, Black,
Polished Brass, Brushed Copper
•
Utensil rail is chrome when ordering stainless steel finish,
brass rail with all other finishes
•
Size: 70cm x 122cm (27-9/16” x 48”)
•
Telescopic flue accommodates 8’ to 9’ ceilings
•
8” round duct connector/backdraft damper
•
Halogen lighting (4 x 20 watt, Type JC 12V 20W G4 Base
- bulbs included) with two-level lighting provides bright
cooktop illumination and a low nighttime setting
•
Advanced, multispeed electronic push-button controls
with individual speed indicators
•
Quiet variable speed centrifugal blower with high efficiency
motor produces 1000 CFM of exhaust
•
Delay timer control automatically shuts off range hood after
ten minutes
•
Special control indicates when it’s time to clean the filter
•
Dishwasher-safe filter features a quick-release latch and
decorative cover plate
•
Heat Sentry
TM
- automatically turns blower to high speed
when excess cooking heat is detected
OPTIONS
•
Flue extension for 10’ ceiling (Model FEXTISER222)
•
Replacement grease filters available
•
Replacement bulb (Part No. SB02300891)
•
Exterior blower version available (IEX222)
SPECIFICATIONS
VOLTS
AMPS
CFM
SONES
DUCT
120
6.26
1000
10.0
8” round
HVI-2100 CERTIFIED RATINGS comply
with new testing technologies and
procedures prescribed by the Home
Ventilating Institute, for off-the-shelf
products, as they are available to
consumers. Product performance is rated
at 0.1 in. static pressure, based on tests
conducted in AMCA’s state-of-the-art test
laboratory. Sones are a measure of
humanly-perceived loudness, based on
laboratory measurements.