QUICK IP CAMERA SETUP GUIDE
START HERE
EASY SETUP STEP 1 - 2 - 3
Connection Diagram
IMPORTANT:
Check power and
voltage to prevent
damage. Please use
only 12VDC 1000mA
or POE to power the
camera. In order to program
the IP camera, you need a computer con-
nected to the same network as the camera.
Internet / WAN
LAN / Local Area Network
LAN / Local Area Network
LAN / Local Area Network
Modem/Router
Modem/Router
Modem/Router
Local Network Video Management Software
Remote Network Video Management Software
!
Need More Help?
For information about features, please refer to the user manual for example settings and definitions. Additional product information can also
be found in the Product Manual on the CD. Please feel free to give us a call or simply log on to http://www.bolideco.com for more information
and support.
Bolide Technology Group
is a ISO 9001:2008 Certified Corporation
1
OR
2
3
Plug in the power to the camera 12VDC or POE.
Plug in the Ethernet cable to the camera.
Plug in the cable to a network hub
and connect to your computer.
Open Internet Explorer, type in the default IP address in
the address bar:
http://192.168.0.120
Login: admin
Password: admin
For additional IP cameras, simply assign different IP once
you have logged on.
*If you encounter IE Active X error, please go to internet
options > enable all Active X control under security set-
tings. Please also make sure your computer is set to the
same network mask.
POE
